The L293 and L293D, manufactured by Texas Instruments, are quadruple high-current half-H drivers designed to drive inductive loads such as relays, solenoids, DC, and bipolar stepping motors, among other high-current/high-voltage loads in positive-supply applications. These components cater to a wide supply-voltage range from 4.5 V to 36 V. The L293 can provide bidirectional drive currents of up to 1 A, whereas the L293D variant supports up to 600 mA, incorporating output clamp diodes for inductive transient suppression. With separate input-logic supply, their internal architecture enables high noise immunity and low power dissipation. These drivers are enabled in pairs, with the enable input controlling the state of the drivers, which are designed to work in high-impedance states when disabled. Markedly, the L293D is distinctively packaged with internal ESD protection and a thermal shutdown feature to safeguard against excessive heat and electric static discharge, ensuring reliability and stability in operation. Collectively, the L293 and L293D are functionally similar to SGS L293 and L293D and are characterized for operation from 0℃ to 70°C, structured to meet a broad array of motor driving requirements with their robust design and advanced features.

A bidirectional, 3 digit counter for keeping track of points. Includes RC network + Schmitt Trigger for input de-bounce. Made for 9V power supply. Supports Common Cathode displays. 2 layer design

- ESP32 DevKitC V4 (microcontroller) - 2x BME280 sensors (temperature, humidity, pressure) - 8ch relay board with 12VDC relays (NO/NC SPDT) - 12VDC power supply - USB connectivity - Various components (resistors, caps, opto couplers, op-amps, motor drivers, multiplexers) - 2x SPDT relay boards (for fan fail-safe) - 4x 2ch bidirectional level controllers (3.3V to 5V) - ESP32 GPIO 21 (SCL) to BME280's SCL - ESP32 GPIO 22 (SDA) to BME280's SDA - ESP32 GPIO 5 (digital output) to 8ch relay board input - ESP32 GPIO 25 (PWM output) -> Fan PWM (0-255 value) - ESP32 GPIO 26 (PWM output) -> Light PWM (0-255 value) - ESP32 GPIO 34 (analog input) -> Tachometer input (0-4095 value, 12-bit ADC) - Add a 5V voltage regulator (e.g., 78L05) to power the ESP32 and other 5V components - Add a 3.3V voltage regulator (e.g., 78L03) to power the BME280 sensors and other 3.3V components - Include decoupling capacitors (e.g., 10uF and 100nF) to filter the power supply lines - Ensure proper grounding and shielding to minimize noise and interference -- Power supply: - VCC=12VD Available, to be used for LM358P - 5V voltage regulator (78L05) - VCC=5V, GND=0V - 3.3V voltage regulator (78L03) - VCC=3.3V, GND=0V - 3.3V voltage regulator (78L03) - VCC=3.3V, GND=0V - Fan PWM boost: - Input (3.3V PWM): 0-3.3V, frequency=20kHz - Output (5V PWM): 0-5V, frequency=20kHz - LM358P op-amp (unity gain buffer) - VCC=5V, GND=0V - R1=1kΩ, R2=1kΩ, R3=1kΩ, R4=1kΩ - C1=10uF (50V), D1=1N4007 - 0-10V signal conditioning: - Input (3.3V PWM): 0-3.3V, frequency=13kHz - Output (0-10V): 0-10V, frequency=13kHz - LM358P op-amp (non-inverting amplifier) - VCC=5V, GND=0V - R5=2kΩ, R6=1kΩ, R7=2kΩ, R8=1kΩ, R9=1kΩ, R10=2kΩ - C2=10uF (50V), R11=10kΩ (1%) ------------------------------------ Fan PWM Boost (3.3V to 5V): 1. ESP32 GPIO 25 (PWM output) -> R1 (1kΩ) -> VCC (3.3V) 2. ESP32 GPIO 25 (PWM output) -> R2 (1kΩ) -> Vin (LM358P) 3. LM358P (Voltage Follower): - VCC (5

Fully-Integrated Bi-directional PD3.0 and Fast Charge Power Bank SOC with Multiple Input and Output Ports based on IP5328P