This project is focused on designing a highly efficient PCB for a switching power supply using a robust selection of electronic components. Our design leverages a flyback topology featuring a ferrite transformer (options EE25 or EE33), a PWM integrated circuit (TL494, SG3525, or UC3842), and a power MOSFET (IRF840 or a similar alternative) for effective high-voltage switching. Fast and reliable rectification is ensured by using a Schottky diode (MBR20100 or FR107) along with a rectifier bridge built from four 1N4007 diodes or a dedicated 4A bridge. Key stabilization and regulation components include the TL431 reference regulator and a Zener diode for precise voltage control in critical areas. For input and output filtering, the design incorporates electrolytic capacitors (470 µF, 25 V for output and 400 V, 100 µF for input) and ceramic capacitors (ranging from 1 nF to 100 nF) to limit high-frequency noise. Additional safety and operational features are provided by an NTC (soft-start thermistor) to prevent current spikes, various resistors (from 1 Ω to 100kΩ), an optocoupler (PC817) for signal isolation, a switch, and a protection fuse. Before moving forward with a finalized PCB layout and schematic details, we need to clarify a few design choices: 1. Transformer Choice: Would you prefer using the EE25 or the EE33 ferrite transformer variant as the heart of the switching power supply design? This detailed approach ensures that the power supply not only meets rigorous performance and safety standards but also supports a reliable and scalable solution for various electronic applications. #PCBDesign #SwitchingPowerSupply #Electronics #SMPS #PowerElectronics #FlybackConverter #CircuitDesign #ElectronicsComponents

R2 changes: -Moving to Letter Modules for ease of design -Adding ESP32 for WiFi On/Off and intensity control -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template

BLE remote control board. Based on SoC ESP32-C3-MINI-1 that allows you to program it as HID volume multichannel control, you can switch channels with the user button, or use it as arrow keys. #internetOfThings

TODO: 7. Recheck HE switch dimensions

This project is a WiFi RF-ID Lock, which uses a Espressif ESP-8684 microcontroller for WiFi connectivity and a Handson Technology RC522 for RF-ID functionality. It also includes an OLED display and user control via a switch. A step-up power converter ensures consistent 3.3V power. #WiFi #MCU #ReferenceDesign #project #ESP8684 #lock #OLED #referenceDesign #simple-embedded #espressif #template #reference-design

Smart High-Side Power Switch, PROFET 24V, Single, 7,2mOhm, 50A, 58V, TO220-7 BTS50085 PROFET 24V TO*263*TabPin4*

This project is a WiFi RF-ID Lock, which uses a Espressif ESP-8684 microcontroller for WiFi connectivity and a Handson Technology RC522 for RF-ID functionality. It also includes an OLED display and user control via a switch. A step-up power converter ensures consistent 3.3V power. #WiFi #MCU #ReferenceDesign #project #ESP8684 #lock #OLED #referenceDesign #simple-embedded #espressif #template #reference-design

Delay On relay switch

This is a Smart Button project embedded with an E-Ink display. It uses an ESP32-PICO-KIT microcontroller and a Cherry MX mechanical switch for input detection. Upon the button press, various information is displayed on the E-Ink screen. #project #Template #projectTemplate

This is a Smart Button project embedded with an E-Ink display. It uses an ESP32-PICO-KIT microcontroller and a Cherry MX mechanical switch for input detection. Upon the button press, various information is displayed on the E-Ink screen. #project #Template #projectTemplate

This is a Smart Button project embedded with an E-Ink display. It uses an ESP32-PICO-KIT microcontroller and a Cherry MX mechanical switch for input detection. Upon the button press, various information is displayed on the E-Ink screen. #project #Template #projectTemplate

This project is a WiFi/Bluetooth Smart Home Magnetic Sensor using the ESP8684-WROOM-02C module from Espressif Systems. It includes a Reed switch for detection magnet, It's powered by a regular non-rechargeable AAA battery. #smartHome #WiFi #bluetooth #BLE #MCU #project #ESP8684 #referenceDesign #simple-embedded #espressif #template #polygon

This is a Smart Button project embedded with an E-Ink display. It uses an ESP32-PICO-KIT microcontroller and a Cherry MX mechanical switch for input detection. Upon the button press, various information is displayed on the E-Ink screen. #project #Template #projectTemplate

Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

A presence sensing device powered by a mean well AC DC converter with a ESP32 C3 for it's brain plus a ld2410 mmwave module. the relay can be used to switch mains power. the ld2410 is connected through the terminal connectors.

Personalized keyboard controller based on the ATMEGA32U4 and Arduino-compatible. Designed with USB-C connection and features a 2-Axis Switch Thumb Joystick by @sparkfun and tactile switches.

Push Button 6mm 7.3mm Square Plunger 50mA Brick nogging 6.3mm SPST 24V SMD,6.3x6x7.3mm Tactile Switch

IMPORTANT NOTICE: Hey, I opened editing permissions and this doc is broken, see the frozen version here: https://www.flux.ai/markwuflux/on-air-markwu2001-remix-r1-backup-freeze-0b49 R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

To optimize your 4-layer board manufacturing process with Seeed Studio Fusion, utilize this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow. #project-template #template #manufacturer-design-rules This project is a vessel monitoring system built using Seeed Studio Xiao Sense, Xiao Expansion Board with OLED, a UART WiFi module, a normally open float switch, and a UART SIM800L cellular module. The system displays a 30-second countdown on the OLED screen, calibrates the IMU sensor, converts to Euler angles, and stores these values for comparison with future readings. It also sets up the WiFi module as an access point to configure the vessel's name, contact numbers, and angle thresholds for list and trim notifications. Reports are sent at specified times via the cellular module.

R2 changes: -Moving to Letter Modules for ease of design -Adding ESP32 for WiFi On/Off and intensity control -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: Adjustable Brightness, 85-90% Drive Efficiency <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template

Personalized keyboard controller based on the ATMEGA32U4 and Arduino-compatible. Designed with USB-C connection and features a 2-Axis Switch Thumb Joystick by @sparkfun and tactile switches. #project #Arduino #ATMEGA32U4 #type-c

This is a Smart Button project embedded with an E-Ink display. It uses an ESP32-PICO-KIT microcontroller and a Cherry MX mechanical switch for input detection. Upon the button press, various information is displayed on the E-Ink screen. #project #Template #projectTemplate

This is a Smart Button project embedded with an E-Ink display. It uses an ESP32-PICO-KIT microcontroller and a Cherry MX mechanical switch for input detection. Upon the button press, various information is displayed on the E-Ink screen. #project #Template #projectTemplate

Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

DC MOTOR CONTROLLING USING SWITCH WITH THE CONNECTORS.