# Audio Electronics | Copilot Preset geDD ## Description Use this Copilot's template to design audio applications like amplifiers, mixers, processors, etc. Modify project requirement properties to adapt to specific needs. #template #project-template ## Project Details - **Owner:** salmakhedr - **Created:** 12/2/2024 - **Last Updated:** 12/3/2024 - **Visibility:** Public - **Domain Application:** Audio - **Human Interface:** LED, Potentiometer - **Compliance:** RoHS, FCC, CE - **Amplifier Type:** Class D - **Frequency Response:** 20Hz to 20kHz - **Distortion:** THD of less than 0.1% at full power - **Operating Temperature:** -40 ºC to 85ºC - **Input Source:** Line-level from standard audio source - **Connectivity:** Bluetooth 5.0, 3.5mm Jack, Screw Terminals - **Number of Channels:** 2 (stereo) - **Operating Voltage:** 12V - **Copies:** 1 ## Key Components ### U1 — [LM358P](https://www.flux.ai/jecstronic/lm358p~nus.md) - License: https://creativecommons.org/licenses/by/4.0/ - Manufacturer Name: Texas Instruments - Datasheet URL: https://www.ti.com/general/docs/suppproductinfo.tsp?distId=10&gotoUrl=https%3A%2F%2Fwww.ti.com%2Flit%2Fgpn%2Flm358 - Manufacturer Part Number: LM358P - Part Type: Operational Amplifier (OP-AMP) **Pins:** - -IN1 [pin 2] - -IN2 [pin 6] - +IN1 [pin 3] - +IN2 [pin 5] - OUT1 [pin 1] - OUT2 [pin 7] - V- [pin 4] - V+ [pin 8] ### V1 — [DC Supply](https://www.flux.ai/jharwinbarrozo/dc-supply~35.md) - Voltage: 5V **Pins:** - ANODE - CATHODE ### V2 — [DC Supply](https://www.flux.ai/jharwinbarrozo/dc-supply~35.md) - Voltage: 5V **Pins:** - ANODE - CATHODE *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/salmakhedr/audio-electronics-or-copilot-preset-gedd~7l](https://www.flux.ai/salmakhedr/audio-electronics-or-copilot-preset-gedd~7l).* --- *Generated from [https://www.flux.ai/salmakhedr/audio-electronics-or-copilot-preset-gedd~7l](https://www.flux.ai/salmakhedr/audio-electronics-or-copilot-preset-gedd~7l)*