Start Panel Control Board Design

flux

Work done
  • Board size set to 120 mm × 80 mm.
  • Project property ConnectorEdge set to bottom.
  • Project property RoutingChannel set to “4 mm above bottom connector row”.
  • PlacementZone properties:
  • DRC review results fetched; DRCFixesPending populated.
Tasks remaining
  • Move connectors to evenly space them along the bottom edge.
  • Ensure adequate routing/via space between placement zones.
  • Fetch ERC review results.
  • Add a NoTallPartsZone constraint covering the 4 mm channel above connectors.
Success criteria review
  • ✅ Board outline is 120 mm × 80 mm with bottom connector edge.
  • ⚠️ Connectors are tagged for bottom placement but not yet evenly spaced.
  • ✅ 4 mm routing channel is reserved above connectors.
  • ✅ Components are zoned: bottom-left (power/relays), bottom-right (LEDs), top (logic).
  • ⚠️ DRC review fetched, but ERC review not yet executed.
Next step: Move all external connectors (J1–J13) to an evenly spaced bottom row, then execute ERC checks to verify connectivity and placement constraints.
Sign up to send

Files

Schematic

Layout

Preview

Competitive Violet Sonic Screwdriver thumbnail