# Arduino Pro Micro vcvi ## Description The Micro is a microcontroller board based on the ATmega32U4 (datasheet), developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. ## Project Details - **Owner:** rzae - **Created:** 10/20/2024 - **Last Updated:** 10/20/2024 - **Visibility:** Public - **Forks:** 3 ## Key Components ### ? — Satisfactory Yellow Translation Collar **Pins:** - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - undefined - 5V Power (DC in/out) - 7-12V Power (DC) - A0/D18 - A1/D19 - A10/D10 (PWM) - A2/D20 - A3/D21 - A6/D4 - A7/D6 (PWM) - A8/D8 - A9/D9 (PWM) - D14 (PWM SPI MISO) - D15 (SPI SCK) - D16 (SPI MOSI) - D2 (2C SDA) - D3(I2C SCL PWM) - D5 (PWM) - D7 - GND - GND - GND - Reset Input - RX (D0) - TX (D1) *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/rzae/arduino-pro-micro-vcvi~k7](https://www.flux.ai/rzae/arduino-pro-micro-vcvi~k7).* --- *Generated from [https://www.flux.ai/rzae/arduino-pro-micro-vcvi~k7](https://www.flux.ai/rzae/arduino-pro-micro-vcvi~k7)*