ESP32 S3 MicroSD

Thought for 5 mins 51 sec
Thought for 5 sec
1/4 Inspect current schematic, executor result, and project files

Inspect current schematic, executor result, and project files

Complete or correct USB-C, power, ESP32-S3, and microSD wiring

Run independent connectivity/ERC verification and remediate issues

Finalize project documentation and report results

Thought for 6 sec
Referenced guidance.
Thought for 8 sec — Looking for orchestration tools
Searching executors in /rustyturtle/esp32-s3-usb-c-microsd-board~ee…
Thought for 5 sec
Reading ESP32-S3 USB C Schematic's report…
Thought for 7 sec
Steering ESP32-S3 USB C Schematic…
Thought for 5 sec
Awaiting 1 background task
Received notification from "ESP32-S3 USB C Schematic" that it finished — picking the work back up.

flux

The executor completed a wiring pass: the project now has 16 nets connecting the 23 existing components, up from zero nets. This confirms schematic connectivity was added during this session.
Still unverified
  • Exact USB-C, TPS62162, ESP32-S3, and microSD pin-to-net connectivity
  • Final GPIO mapping and card-detect bias
  • ERC/design-review status
  • Project Specification, power budget, firmware starter, and bring-up-plan files
  • Schematic readability and no-connect assignments
I could not retrieve the executor’s final report or perform the required independent review, so the schematic should not yet be considered manufacturing-ready. Execution stopped because your ACUs ran out.
Review schematic connectivity
Check ERC and DRC
Create project documentation
Verify power connections
Sign up to send

Files

Schematic

Layout

Preview

PS1
J1
J2
U1
R3
Resistance
10kΩ
C5
Capacitance
100nF
C3
Capacitance
100nF
R4
Resistance
10kΩ
C4
Capacitance
22uF
R1
Resistance
5.1kΩ
C7
Capacitance
1uF
R5
Resistance
10kΩ
R6
Resistance
10kΩ
C6
Capacitance
10uF
C2
Capacitance
22uF
R2
Resistance
5.1kΩ
C1
Capacitance
10uF
SW1
U2
L1
Inductance
2.2uH
F1
SW2
D1
No files yet