PSRAM SPI Module for Pi Pico


Let's start by clarifying a couple of details. I have two questions for you and will ask them one at a time:
  1. Would you like to add both the Raspberry Pi Pico and the PSRAM SPI module to your schematic, or do you already have a Pico in your design?
I just want the module
Alright, we'll focus solely on the PSRAM SPI module. Here's my next question:
  1. Do you have a specific PSRAM module part number in mind, or should I search the Flux library for an 8MB SPI PSRAM module suggestion?
4677 PSRAM (Pseudo SRAM) Memory IC 64Mbit SPI 133 MHz 8-SOIC
Below is a suggestion to add the PSRAM SPI module to your schematic:
Schematic Update:
  • Add Component:
  • Key Considerations:
    • Ensure proper power connections by connecting the VCC pins to the appropriate supply (with decoupling capacitors added per power pin as recommended by the datasheet).
    • Connect the GND pins to the Ground component.
    • Wire up the SPI interface pins (SCLK, CS, SI, SO) appropriately to your system or host interface when integrating with your design.
You can use the "Apply changes" button to add these schematic components and make the necessary wiring connections later as you integrate the module into your project.
Apply PSRAM change
Accept & plan SPI connection
Integrate and check datasheet
Proceed—prepare for MCU addition

Schematic of Pico 8MB SRAM module
C1
Capacitance
0.1µF
U2
R3
Resistance
22 Ω
R2
Resistance
22 Ω
J1
R1
Resistance
10kΩ

Pico 8MB SRAM module