Multi Module PCB Design
pcb board with waveshare rp2350 zero pi as the main controller, an esp32 wroom handling wifi and bluetooh, cc1101, rdm6300, nrf24, 433mhz transmitter and receiver. pn532 and also 4 pin ir receiver and 4pin it transmitter. it will also need a connector for a 1s lipo battery up to 6000mah, charging circuit. will aslo need to connect to a display
Thought for 2 sec
The project is still empty; no schematic or PCB changes were made because no ACUs are currently available.
Remaining work: define the display/interface and connector types, confirm whether the radio devices are modules or onboard ICs, establish power/current and antenna requirements, then design the LiPo charger/power path, controller interconnects, schematic, PCB placement, and routing. Add ACUs to continue the build.
Brainstorm design requirements
Choose display interface
Choose radio integration
Plan LiPo power system
No schematic yet
Talk to Flux to get started.
No layout yet
When components get added to the schematic, they'll show up here.