High-Level Block Diagram Creation

R

rodgerliu

Create a high level mermaid block diagram of this project. Include key component's manufacturer part number in each block whenever possible.

flux

I’ll inspect the project structure and BOM, then create a concise high-level Mermaid block diagram document with MPNs where available.

flux

I found the major blocks: RP2350 MCU, power tree, M40 interface, XY2/encoder DB25, laser safety, I2C expanders, isolated digital I/O, and analog ADS8688-LZM8688 interface. I’m saving the diagram as a project document now.

flux

Created the high-level Mermaid block diagram and saved it in High Level Block Diagram. It includes the main functional blocks and key MPNs from the schematic/BOM, with caveats for connector-only or ambiguous regulator entries.
Review diagram and ERC
Run schematic ERC
Fix ambiguous MPNs
Create power tree
Check BOM risk
Explain block diagram
Sign up to send

Files

Schematic

Layout

3D View

ERC报告 — 按附录B分类
运行结果摘要
当前ERC主要为 Floating Pin 警告，来源于尚未完成端口/连接器符号补全及部分预期No-Connect处理项。
附录B预期警告处理
  • 单端网络 MB_INTERLOCK_IN / MB_INTERLOCK_OUT：按附录B标注为外部客户接线，不修改原理图拓扑。
  • J_OM0~J_OM2 悬空端：按附录B作为默认跳线状态处理，需No-ERC。
  • 独立电源域：PWR_5V、PWR_ENC_5V、ADC_5V_SENSOR、ADC_3V3_ADC保持独立，不混接。
  • SPI_MISO：应设为Bidirectional。
  • J5 DNP与未使用GPIO：应显式No-Connect或上下拉。
当前Flux ERC摘录
  • Floating Pin: U7:SW/BOOT/VCC/VIN/PG/EP/PGND/EN/FB
  • Floating Pin: U9/U10 全部差分接收相关引脚待连接DB25和MCU GPIO
  • Floating Pin: U18 A/B/Y/VCC/GND 待连接Interlock与Laser Gate
  • Floating Pin: U19~U22 光耦隔离通道待连接J_IO和MCU/扩展IO
  • Floating Pin: U3/U5 MCP23017端口待连接I2C、地址、IO与上下拉
结论
附录B定义的预期ERC项目已分类记录；当前项目仍需要补齐连接器符号与剩余CONNECT语句后再次运行ERC，才能得到可交付的干净ERC报告。

  • 运行结果摘要

  • 附录B预期警告处理

  • 当前Flux ERC摘录

  • 结论