PCB Design Review and Fixes
Worked for 53 sec
Blocked: the board is ready to route, but the router still cannot start because an existing auto-layout job is locked in
outOfCredit state. Current live review shows 61 airwires and no overlap/dangling/invalid-layer blockers.You’ll need to discard/clear the stuck auto-layout job or restore the required routing/auto-layout credits; then I can run the router and re-check all airwire reviews.
FIX airwires reviews all of them
Thought for 16 sec
I’m trying the router again now and will re-check the airwire review immediately after. If the same active-job lock is still present, that is the only remaining blocker preventing me from clearing the 61 airwires.
Thought for 4 sec
Still blocked by the same platform job lock: an existing auto-layout job is active in
outOfCredit state, so the router cannot start.Current live status: 61 airwires remain; overlap, dangling-trace, and invalid-layer checks are clear. To fix the airwires, the stuck job
auto-layout-7e6ac50c-2fbb-4260-9cd0-c9c18c26bec1 must be discarded/cleared or routing credits restored first.List remaining airwires
Run DRC/ERC
Clear stuck job
Prioritize critical nets
Refine this doc
Ask about this doc
Project Specification
Design Summary
Status: Draft / Review / Approved
Manufacturing target: Prototype / EVT / DVT / PVT / Production
Software / firmware: repository link
Scope
Purpose
In scope
Out of scope
System context
Requirements
Functional
Electrical
Mechanical / environmental
Key constraints
Dependencies and risks
Dependencies
Key risks
Validation
Success criteria
Planned checks
Release-facing notes
Expected deliverables
Special release notes
Change notes / open questions
Changes in this revision
Open questions
Design Summary
Scope
System context
Requirements
Functional
Electrical
Mechanical / environmental
Key constraints
Dependencies and risks
Validation
Release-facing notes
Change notes / open questions
