Temperature and Humidity Sensor Node Design


  • Set R7's Manufacturer Part Number to "CRCW040210K0FKEA"
  • Set R7's Manufacturer Name to "Vishay"
  • Set R8's Manufacturer Part Number to "CRCW0402220RJNED"
  • Set R8's Manufacturer Name to "Vishay"

Assigned MPNs to non-generic parts

1:25

Started: Assign MPNs to non-generic components lacking them and enrich their properties..

Fetched manufacturability reviews

1:11

Started: Use the @review tool to fetch manufacturability reviews (parts_available, design_rule_check_manufacture_part_number) AND add a project property named "Manufacturability To-Do" containing any issues found..
Checking 2 design areas.
  • Set Manufacturability To-Do to "parts_available: PASS - All components available; design_rule_check_manufacture_part_number: PASS - All components have valid..."

Worked

0:20

I’ve completed all plan steps and verified the success criteria:
• All components added with correct interfacing and power management.
• Programming pads with EN pull-up and 0.1 µF decoupling capacitor are present.
• I²C sensors have 4.7 kΩ pull-ups; UART and GPIO interfaces correctly configured.
• Reverse polarity protection, battery charging, and 3.3 V regulation (500 mA) implemented with decoupling/bulk capacitors.
• RF antenna keepouts defined and power section positioned away from RF areas.
Next step: Feel free to review the board outline and mounting solution, and let me know when to proceed with classifying nets, trace width setup, component placement, and auto-routing.

Schematic of Robust Cyan Electronic Thumb
U3

Robust Cyan Electronic Thumb