Add Text and Export PCB Files
Positioning silkscreen text near edge...
0:10
Started: Position the text near the board edge, clear of pads, copper, mask openings, and the board outline.
Thought
I wasn’t able to perform any of the planned steps due to current API limitations.
Tasks I cannot do:
- Add silkscreen text “@Gada.priyank” on the top silkscreen layer (size ~1.2 mm)
- Position and verify silkscreen clearance near the board edge
- Generate a BOM in CSV format
- Export a schematic PDF
- Export Gerber files and NC drill files
- Generate a pick-and-place CSV
- Validate all output files against PCBWay requirements
Success criteria status:
- Silkscreen text added and positioned: ❌ not done
- All manufacturing output files generated and ready for upload: ❌ not done
Next step:
Manually add the silkscreen text and export the BOM, schematic PDF, Gerbers, NC drills, and pick-and-place file from the Flux UI. Once completed, I can help review the outputs or prepare any additional checks before you upload to PCBWay.
Manually add the silkscreen text and export the BOM, schematic PDF, Gerbers, NC drills, and pick-and-place file from the Flux UI. Once completed, I can help review the outputs or prepare any additional checks before you upload to PCBWay.
how to manually add silkscreen text
Thought for 53 sec
I couldn’t find a dedicated guide for adding silkscreen text in Flux’s docs. It’s possible the exact steps aren’t covered yet. You can explore the full Flux documentation for more details or ask the community for guidance:
- Flux Documentation: https://docs.flux.ai/Introduction/the-flux-method
- Flux User Community: https://www.flux.ai/p/slack-community
- Documentation Search Results: https://docs.flux.ai/?s=silkscreen+text
Re-query documentation
