Temperature and Humidity Sensor Node Design

Thought

Set Domain to "Consumer Electronics"
Set Operating Voltage to "5"
Set Connectivity to "WiFi"
Set Power Requirements to "USB"
Set Implementation Details to "USB-C 5 V default sink; 3.3 V rail; Wi-Fi/BLE MCU module; I2C digital T/RH sensor; reverse/OVP/UVLO/OCP input protection plan..."

Thought for 1 sec

Thought for 4 sec

Added 1x ESP32-C3-MINI-1-N4 as U1 (Pins: GND::51, NC::35, GND::36, GND::49_9, IO1, GND::1, NC::4, GND::49_6, NC::10, RXD0, EN, GND::46, GND::49_3, TXD0, NC::32 ... and 46 more)
Added 1x SHTC3-TR-2.5KS as U2 (Pins: SCL, SDA, VSS, VDD, EPAD)
Added 1x USB-C 2.0 Receptacle as J1 (Pins: SBU2, GND::1, VBUS::3, GND::16, VBUS::14, D-::7, GND::15, GND::2, D-::9, CC1, VBUS::4, D+::10, VBUS::13, D+::8, SBU1 ... and 1 more)
Added 1x TPS25940LRVCR as U3 (Pins: DVDT, OUT_5, IN_4, DEVSLP, OUT_3, EP, IN_2, PGTH, PGOOD, IN_3, ~FLT, OUT_2, IN_1, OUT_1, IMON ... and 6 more)
Added 1x AP2112K-3.3TRG1 as U4 (Pins: VIN, EN, GND, NC, VOUT)
Added 6x Generic Resistor as R1, R2, R3, R4, R5, R6 (Pins: P2, P1)
Added 7x Generic Capacitor as C1, C2, C3, C4, C5, C6, C7 (Pins: P1, P2)
Removed U1
Removed U2
Removed Q1

Files

Schematic

Layout

Preview

Project Specification

Design Summary

Status: Draft / Review / Approved

Manufacturing target: Prototype / EVT / DVT / PVT / Production

Software / firmware: repository link

Scope

Purpose

In scope

Out of scope

System context

Requirements

Functional

Electrical

Mechanical / environmental

Key constraints

Dependencies and risks

Dependencies

Key risks

Validation

Success criteria

Planned checks

Release-facing notes

Expected deliverables

Special release notes

Change notes / open questions

Changes in this revision

Open questions