Mapping a Combat Robot Circuit

R

retrocoderamen

can you map out the circuit

IMG_20261012_190702

IMG_20261012_190723

Created a project doc

Circuit Mapping Notes

View Document
Circuit Mapping Notes Request
Reverse-engineer the circuit from IMG_20261012_190702.jpg (component side) and IMG_20261012_190723.jpg (copper side).
Observations from the supplied photos
  • An irregular single-sided board with several exposed switch-contact patterns on the copper side.
  • The component side has two visible axial resistors labelled R1 and R2, two upright capacitor-like components, and a small black component whose marking is not legible at this resolution.
  • Green and yellow wires lead to a round piezo-like sound element visible in the copper-side photo.
  • Visible legends include SP+, B+, GND, SELECT SOUND, ON, OFF, UP, RIGHT, DOWN, LEFT, K.LOW and K.HGH. These labels are observations, not verified net assignments.

flux

I reviewed both photos and saved the visible components, switch contacts, and board labels in Circuit Mapping Notes; I haven’t traced or created the schematic yet, so the design remains empty. Completing the map needs clearer component markings and verification of ambiguous copper connections; creating the schematic requires Agent mode.
Execution stopped because your ACUs ran out.
Continue in Agent Mode

Waiting for input

Sign up to send
No schematic yet

Talk to Flux to get started.