# OPAMP 100X en configuracion No Inversor ## Description Welcome to your new project. Imagine what you can build here. ## Project Details - **Owner:** pm124010 - **Created:** 12/18/2024 - **Last Updated:** 8/24/2025 - **Visibility:** Public - **Stars:** 3 ## Key Components ### J1 — [Connector 01x04 Horizontal](https://www.flux.ai/jharwinbarrozo/connector-01x04-horizontal~h0.md) - Part Type: Connector **Pins:** - PIN_1 [pin 1] - PIN_2 [pin 2] - PIN_3 [pin 3] - PIN_4 [pin 4] ### U1 — [LM741](https://www.flux.ai/jecstronic/lm741~f1y.md) - Manufacturer Name: Microchip - License: https://creativecommons.org/licenses/by/4.0/ - Manufacturer Part Number: mps602 - Part Type: Operational Amplifier (OP-AMP) - Datasheet URL: https://www.microchip.com/ **Pins:** - - [pin 2] - + [pin 3] - NC [pin 8] - NULL [pin 1] - NULL [pin 5] - OUTPUT [pin 6] - V- [pin 4] - V+ [pin 7] ### V1 — [DC Supply](https://www.flux.ai/jharwinbarrozo/dc-supply~35.md) - Voltage: 9V **Pins:** - ANODE - CATHODE ### V2 — [Waveform Generator](https://www.flux.ai/jharwinbarrozo/waveform-generator~ggu.md) - Phase Offset: 0° - Duty Cycle: 50% - Peak Voltage: 0.10V - Frequency: 60Hz - DC Offset: 0V - Part Type: Power Source **Pins:** - P1 [pin 1] - P2 [pin 2] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/pm124010/opamp-100x-en-configuracion-no-inversor~6s](https://www.flux.ai/pm124010/opamp-100x-en-configuracion-no-inversor~6s).* --- *Generated from [https://www.flux.ai/pm124010/opamp-100x-en-configuracion-no-inversor~6s](https://www.flux.ai/pm124010/opamp-100x-en-configuracion-no-inversor~6s)*