Project Idea Start
Thought for 4 mins 11 sec
Thought for 6 sec
Checking Build schematic and place PCB progress…
Thought for 9 sec — Considering progress updates
Steering Build schematic and place PCB…
Thought for 8 sec
Awaiting 1 background task
Thought for 7 sec
Checking ESP32 Triple Screen Dashboard progress…
Received notification from "ESP32 Triple Screen Dashboard" that it finished — picking the work back up.
Thought for 46 sec
Schematic and placement are complete, and the routing precheck is clean. I’m starting the full-board route now, then I’ll check for any remaining airwires or DRC issues.
Worked for 7 mins 44 sec
Built and routed the ESP32 Triple Screen Dashboard motherboard:
- Complete 9-component schematic with three ILI9341 sockets
- 165 × 55 mm, 2-layer PCB
- All components placed on the top layer
- ESP32 USB faces the left board edge
- Autorouter converged with 0 airwires
- No placement or routing feasibility issues
Open item
- One false-positive ERC remains: the library ESP32 DevKit part incorrectly classifies unused
VP/GPIO36as a power input. It was marked intentionally unconnected; connecting it to power would be electrically wrong. - GPIO2, GPIO5, and GPIO15 are ESP32 boot-strapping pins. The requested wiring is preserved, but attached displays must not force incorrect levels during startup.
Add boot-safe circuits
Create firmware starter
Prepare bring-up plan
Review manufacturing readiness
