Power System Design Guide

flux

0:36

Below is a Mermaid block diagram that outlines the interconnection of the key power system components as described:
Diagram



  
    
  
  
    
  



















240V AC Input
Transformer & Rectifier
DC Bus
Protection: Schottky Diodes & Capacitors
"Boost Converter (MT3608)"
Buck Converter for node_9V
"Buck Converter for 3.3V (AP7333-33)"
"Buck Converter for 1.8V (AP7333-18)"
"LED Indicators (Status)"
This diagram shows:
  • The 240V AC Input is stepped down and rectified by the Transformer & Rectifier to provide a DC bus.
  • The DC output flows through Protection elements (Schottky diodes and capacitors).
  • The Boost Converter (MT3608) then raises the voltage (from battery or DC bus) to the level needed for further regulation.
  • The boosted voltage is branched off to:
    • A buck converter for final 9V output
    • A buck converter for 3.3V output (using the AP7333-33)
    • (And a buck converter for 1.8V output using the AP7333-18, if needed for internal auxiliary functions.)
  • LED Indicators monitor the status of the outputs.
Feel free to adjust the block labels as needed for your design documentation.
Update project properties
Select main components
Find equivalent components
405 days
Sign up to send
 

Dizzy Gray Flying Cab

Dizzy Gray Flying Cab thumbnail
Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor

Qty 1

Controls