[![Arrow pointing up](https://www.flux.ai/p/assets/site/644afd186a15a03816359225_arrow_up.svg)](#top-for-scrolling)

# Explore featured projects

Introducing a new way to work: Give Flux a job and it plans, explains, and executes workflows inside a full browser-based eCAD you can edit anytime.

## Whether you're building a simple circuit board or designing hardware for the next Mars mission, Flux is where great hardware projects are born.

Design PCBs with AI

Introducing a new way to work: Give Flux a job and it plans, explains, and executes workflows inside a full browser-based eCAD you can edit anytime.

[

![Screenshot of the Flux app showing a PCB in 3D mode](https://www.flux.ai/p/assets/blogs/miscellaneous/upsell-desktop.webp)

](https://www.flux.ai/signup)

[

Get Started for Free

](https://www.flux.ai/signup)

projects

raspberrypi

[

Visit project

](https://www.flux.ai/vasy_skral/radar-sensor-xm125?editor=pcb_3d)[

![3D PCB view of Radar Sensor XM125](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/rpi-radar.webp)

](https://www.flux.ai/vasy_skral/radar-sensor-xm125?editor=pcb_3d)

[

### Radar Sensor XM125

](https://www.flux.ai/vasy_skral/radar-sensor-xm125?editor=pcb_3d)

Turn a PC or Raspberry Pi into a radar lab. Plug-and-play USB-C, protected data lines, dual serial channels, and full access to reset/boot/I2C/UART/SWD powered by Acconeer XM125.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![vasyl-skral's Avatar Photo](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

projects

audio

[

Visit project

](https://www.flux.ai/jharwinbarrozo/high-fidelity-class-d-audio-amplifier-5qbft~ht0/pcb/3d)[

![3D PCB view of High-Fidelity Class-D Audio Amplifier](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/class-d-audio-amp-50w.webp)

](https://www.flux.ai/jharwinbarrozo/high-fidelity-class-d-audio-amplifier-5qbft~ht0/pcb/3d)

[

### High-Fidelity Class-D Audio Amplifier

](https://www.flux.ai/jharwinbarrozo/high-fidelity-class-d-audio-amplifier-5qbft~ht0/pcb/3d)

50W stereo (or 100W mono PBTL) Class-D audio amplifier based on the TPA3116D2DAD, with minimal external components. Accepts analog audio input and directly drives speakers — no additional circuitry required.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

esp32

projects

[

Visit project

](https://www.flux.ai/vasy_skral/esp32-x86-pc?editor=pcb_3d)[

![3D PCB view of ESP32 x86 PC](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/x86-pc.webp)

](https://www.flux.ai/vasy_skral/esp32-x86-pc?editor=pcb_3d)

[

### ESP32 x86 PC

](https://www.flux.ai/vasy_skral/esp32-x86-pc?editor=pcb_3d)

A self-contained “retro PC” platform built around the ESP32, exposing classic PC-style IO: VGA video, PS/2 keyboard/mouse, audio-out to an onboard speaker, microSD storage, plus USB-C for power and USB-UART for programming/debug.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

projects

[

Visit project

](https://www.flux.ai/ryanf/usb-type-c-pd-dfp?editor=pcb_3d)[

![3D PCB view of USB type-C PD DFP](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/usb-c-dfp.webp)

](https://www.flux.ai/ryanf/usb-type-c-pd-dfp?editor=pcb_3d)

[

### USB type-C PD DFP

](https://www.flux.ai/ryanf/usb-type-c-pd-dfp?editor=pcb_3d)

USB Type-C PD Downstream-Facing Port design featuring TPS25740 PD controller, LM5175 buck converter, integrated protections and precision monitoring

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/ryan-f.webp)

[ryanf](https://flux.ai/ryanf)

esp32

iot

modules

projects

[

Visit project

](https://www.flux.ai/jharwinbarrozo/esp32-dual-ultrasonic-water-level-monitoring-system)[

![3D PCB view of Dual Ultrasonic Water Level Monitoring System](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/esp32-ultrasonic-water-level-monitoring.webp)

](https://www.flux.ai/jharwinbarrozo/esp32-dual-ultrasonic-water-level-monitoring-system)

[

### Dual Ultrasonic Water Level Monitoring System

](https://www.flux.ai/jharwinbarrozo/esp32-dual-ultrasonic-water-level-monitoring-system)

Monitors water levels in two tanks using ultrasonic sensors and an ESP32 microcontroller. It controls three water pumps and one dosinator via four 5V relays.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

projects

[

Visit project

](https://www.flux.ai/vasyl/electronic-speed-controller~so6/pcb/3d)[

![3D PCB view of ESC for Quadcopter](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/esc-quadcopter.webp)

](https://www.flux.ai/vasyl/electronic-speed-controller~so6/pcb/3d)

[

### ESC for Quadcopter

](https://www.flux.ai/vasyl/electronic-speed-controller~so6/pcb/3d)

40A BLDC ESC for quadcopters, compatible with BLHeli\_S firmware. Built around TPN2R703NL MOSFETs (45A continuous / 90A peak) driven by an MP1907 half-bridge gate driver.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasyl](https://flux.ai/vasyl)

projects

stm32

[

Visit project

](https://www.flux.ai/vasyl/stm32f4-flight-controller-template-4bepc~q64/pcb/3d)[

![3D PCB view of STM32F4 Flight Controller](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/stm32f4-flight-controller.webp)

](https://www.flux.ai/vasyl/stm32f4-flight-controller-template-4bepc~q64/pcb/3d)

[

### STM32F4 Flight Controller

](https://www.flux.ai/vasyl/stm32f4-flight-controller-template-4bepc~q64/pcb/3d)

STM32F4-based flight controller featuring a 6-axis IMU (accelerometer + gyroscope) for stable flight dynamics and a MAX7456EUI OSD generator for real-time video overlay of flight telemetry.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasyl](https://flux.ai/vasyl)

projects

stm32

[

Visit project

](https://www.flux.ai/vasy_skral/ct-scanner-das-board?editor=pcb_3d)[

![3D PCB view of CT Scanner DAS Board](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/ct-scanner-das.webp)

](https://www.flux.ai/vasy_skral/ct-scanner-das-board?editor=pcb_3d)

[

### CT Scanner DAS Board

](https://www.flux.ai/vasy_skral/ct-scanner-das-board?editor=pcb_3d)

CT Scanner DAS board design based on DDC232 ADC, iCE40 UltraPlus FPGA, and STM32F745 MCU integration. Designed for efficient data acquisition and processing

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

esp32

raspberrypi

iot

projects

[

Visit project

](https://www.flux.ai/vasy_skral/pico-smart-automation-controller-nextpcb-1-4-layer-standard-constraints)[

![3D PCB view of PICO Smart Automation Controller](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/pico-smart-automation.webp)

](https://www.flux.ai/vasy_skral/pico-smart-automation-controller-nextpcb-1-4-layer-standard-constraints)

[

### PICO Smart Automation Controller

](https://www.flux.ai/vasy_skral/pico-smart-automation-controller-nextpcb-1-4-layer-standard-constraints)

A compact and versatile automation system powered by the RP2350A microcontroller and ESP-WROOM-02D Wi-Fi module. It enables intelligent control for sensors, relays, and devices.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

projects

attiny

audio

[

Visit project

](https://www.flux.ai/cherepanyadima/modern-distortion-effect-pedal-v1~w0/pcb/3d)[

![3D PCB view of Modern Distortion Effect Pedal](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/modern-distortion-pedal.webp)

](https://www.flux.ai/cherepanyadima/modern-distortion-effect-pedal-v1~w0/pcb/3d)

[

### Modern Distortion Effect Pedal

](https://www.flux.ai/cherepanyadima/modern-distortion-effect-pedal-v1~w0/pcb/3d)

Low-noise electric guitar distortion pedal with gain, tone, and volume controls. Relay true bypass with soft-touch foot switch, anti-pop mute, and symmetrical clipping. OPA1656 op-amps, separated analog/digital supplies, and ATtiny412 control logic keep noise to a minimum.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/dima.webp)

[cherepanyadima](https://flux.ai/cherepanyadima)

raspberrypi

iot

[

Visit project

](https://www.flux.ai/seeedstudio/the-green-dot-2040e5-board?editor=pcb_3d)[

![3D PCB view of The Green Dot 2040E5 Board](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/green-dot-pcb.webp)

](https://www.flux.ai/seeedstudio/the-green-dot-2040e5-board?editor=pcb_3d)

[

### The Green Dot 2040E5 Board

](https://www.flux.ai/seeedstudio/the-green-dot-2040e5-board?editor=pcb_3d)

The "Green Dot 2040E5" Board is a node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 modules from Seeed Studio to do its magic. It also has amazing power management solar charging and battery protection.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/seeedstudio.webp)

[seeedstudio](https://flux.ai/seeedstudio)

raspberrypi

[

Visit project

](https://www.flux.ai/flux/pico-macro-keyboard)[

![3D PCB view of Pico Macro Keyboard](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/pi-macro-keyboard.webp)

](https://www.flux.ai/flux/pico-macro-keyboard)

[

### Pico Macro Keyboard

](https://www.flux.ai/flux/pico-macro-keyboard)

The Pico Macro Keyboard is a compact and powerful macro pad built using the latest Raspberry Pi Pico 2. Inspired by the Figma Creator Micro, this keyboard is designed for customizable control and enhanced productivity.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/flux.webp)

[flux](https://flux.ai/flux)

&

![vasyl-skral's Avatar Photo](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

raspberrypi

iot

audio

[

Visit project

](https://www.flux.ai/collinsemasi/avocaudio-a-tinyml-community-board-v1?editor=pcb_3d)[

![3D PCB view of AvocAudio: TinyML Board](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/avoc-audio-pcb.webp)

](https://www.flux.ai/collinsemasi/avocaudio-a-tinyml-community-board-v1?editor=pcb_3d)

[

### AvocAudio: TinyML Board

](https://www.flux.ai/collinsemasi/avocaudio-a-tinyml-community-board-v1?editor=pcb_3d)

AvocAudio is a tinyML board designed for extensive audio data collection across various tinyML applications, using Raspberry Pi RP2040 and LoRa-E5 LoRaWAN. It has an SD card slot for local storage and can run on solar power or a lithium-ion battery for efficient energy use.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/collins.webp)

[collinsemasi](https://flux.ai/collinsemasi)

projects

[

Visit project

](https://www.flux.ai/collinsemasi/brave-power-management-board?editor=pcb_3d)[

![3D PCB view of Brave Power Management Board](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/brave-board.webp)

](https://www.flux.ai/collinsemasi/brave-power-management-board?editor=pcb_3d)

[

### Brave Power Management Board

](https://www.flux.ai/collinsemasi/brave-power-management-board?editor=pcb_3d)

Brave is a versatile and efficient power board that can provide 12v, 5v, and 3.3v outputs. Based on a step-up converter MT3608, CN3063 CC/CV charger, a PWM step-down DC/DC converter RT8059GJ5, and a low-loss power distribution switch SY6280A. It can be powered by a battery or solar panel, perfect for edge computing IOT applications.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/collins.webp)

[collinsemasi](https://flux.ai/collinsemasi)

esp32

iot

projects

[

Visit project

](https://www.flux.ai/collinsemasi/biskuit-ai-project-showcase?editor=pcb_3d)[

![3D PCB view of Biskuit AI](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/biskuit.webp)

](https://www.flux.ai/collinsemasi/biskuit-ai-project-showcase?editor=pcb_3d)

[

### Biskuit AI

](https://www.flux.ai/collinsemasi/biskuit-ai-project-showcase?editor=pcb_3d)

Biskuit is a compact, ESP32-S3-powered wearable device designed for real-time transcription and effortless note-taking. Featuring a 3-microphone array and wireless communication to sync to to the cloud instantly.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/collins.webp)

[collinsemasi](https://flux.ai/collinsemasi)

projects

[

Visit project

](https://www.flux.ai/vasy_skral/spartan-ai-accelerator)[

![3D PCB view of Spartan AI Accelerator](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/spartan.webp)

](https://www.flux.ai/vasy_skral/spartan-ai-accelerator)

[

### Spartan AI Accelerator

](https://www.flux.ai/vasy_skral/spartan-ai-accelerator)

The Spartan AI Accelerator leverages the AMD Spartan-7 FPGA for efficient AI tasks. Optimized for size, cost, and performance, it supports extensive I/O and DDR memory interfacing, ensuring high-speed computations.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

projects

[

Visit project

](https://www.flux.ai/vasy_skral/vehicle-display-system)[

![3D PCB view of Tesla Roadster Infotainment System](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/tesla.webp)

](https://www.flux.ai/vasy_skral/vehicle-display-system)

[

### Tesla Roadster Infotainment System

](https://www.flux.ai/vasy_skral/vehicle-display-system)

This is a custom layout developed independently from the open source schematic diagram, not the original layout, ensuring unique optimization and innovation. The system ensures optimal performance with the integration of power networks alongside various interface controllers.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

stm32

projects

[

Visit project

](https://www.flux.ai/vasy_skral/stm32mp1-linux-card?editor=pcb_2d)[

![3D PCB view of Linux Single Board Computer](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/linux-single-board-computer.webp)

](https://www.flux.ai/vasy_skral/stm32mp1-linux-card?editor=pcb_2d)

[

### Linux Single Board Computer

](https://www.flux.ai/vasy_skral/stm32mp1-linux-card?editor=pcb_2d)

Linux Single Board Computer using STM32MP157FAC1, featuring DDR memory, a power management IC, USB and SD card interfaces, and essential user controls, aimed at versatile embedded applications.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

esp32

projects

audio

[

Visit project

](https://www.flux.ai/vasy_skral/portable-audio-dsp)[

![3D PCB view of Portable Audio DSP](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/portable-dsp.webp)

](https://www.flux.ai/vasy_skral/portable-audio-dsp)

[

### Portable Audio DSP

](https://www.flux.ai/vasy_skral/portable-audio-dsp)

Portable Audio DSP for advanced sound processing and control using ESP32, ADC, DAC, and ADAU1452 SigmaDSP DIgital Audio Processor. Perfect for embedded audio applications for delivering outstanding audio performance.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

arduino

projects

[

Visit project

](https://www.flux.ai/cwong7/scale-snap-3d)[

![3D PCB view of Scale Snap 3D](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/scale-snap-3d.webp)

](https://www.flux.ai/cwong7/scale-snap-3d)

[

### Scale Snap 3D

](https://www.flux.ai/cwong7/scale-snap-3d)

3D Camera Module is a scalable SPI enabled 4 camera array pinout for 3D photogrammetry reconstruction which uses I2C to connect between each module to expand camera capacity while keeping capture sequences in sync.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/flux.webp)

[cwong7](https://flux.ai/cwong7)

stm32

projects

[

Visit project

](https://www.flux.ai/moshtey/semgdaq)[

![3D PCB view of sEMG-DAQ](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/semg-daq.webp)

](https://www.flux.ai/moshtey/semgdaq)

[

### sEMG-DAQ

](https://www.flux.ai/moshtey/semgdaq)

sEMG-DAQ is a wearable 6 channel data acquisition unit for capturing surface electromyographic (sEMG) signals from human arm muscles while conditioning, digitizing, processing and transmitting them as sEMG data to an external AI accelerated board through an SM12B-SRSS IDC connector where AI models are run for various applications.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/flux.webp)

[moshtey](https://flux.ai/moshtey)

esp32

projects

iot

[

Visit project

](https://www.flux.ai/jr98/environmental-exposure-risk-meter)[

![3D PCB view of Environmental Exposure Risk Meter](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/risk-meter-pcb.webp)

](https://www.flux.ai/jr98/environmental-exposure-risk-meter)

[

### Environmental Exposure Risk Meter

](https://www.flux.ai/jr98/environmental-exposure-risk-meter)

Environmental exposure risk measuring device based on ESP32, ultraviolet light, and CO2 gas sensor modules. It has a voltage booster MT3608 chip and a solar panel for lithium battery charger with MPPT CN3791 chip.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jr98.webp)

[jr98](https://flux.ai/jr98)

esp32

iot

projects

[

Visit project

](https://www.flux.ai/jr98/esp32-robot-controller)[

![3D PCB view of ESP32 Robot Controller](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/robot-controller-pcb.webp)

](https://www.flux.ai/jr98/esp32-robot-controller)

[

### ESP32 Robot Controller

](https://www.flux.ai/jr98/esp32-robot-controller)

Control board for autonomous or radio-controlled robots based on ESP32. It has inputs for distance sensors, encoders, or a Flysky RC controller receiver. I2C display to visualize and select configuration modes.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jr98.webp)

[jr98](https://flux.ai/jr98)

esp32

projects

[

Visit project

](https://www.flux.ai/particle/robo-project)[

![3D PCB view of Robo Project](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/robo-project.webp)

](https://www.flux.ai/particle/robo-project)

[

### Robo Project

](https://www.flux.ai/particle/robo-project)

The Robo Project is a mobile robotic platform featuring a Particle Argon board, 4 motor-wheels controlled by L293D drivers, and an HC-SR04 ultrasonic sensor for obstacle detection. It's ideal for exploration, remote control, and robotics education.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/particle.webp)

[particle](https://flux.ai/particle)

arduino

projects

[

Visit project

](https://www.flux.ai/robertdalesmith/snes-controller-arduino-nano-shield?editor=pcb_3d)[

![3D PCB view of SNES Controller Arduino Nano Shield](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/snes-pcb.webp)

](https://www.flux.ai/robertdalesmith/snes-controller-arduino-nano-shield?editor=pcb_3d)

[

### SNES Controller Arduino Nano Shield

](https://www.flux.ai/robertdalesmith/snes-controller-arduino-nano-shield?editor=pcb_3d)

Meet the Super Nintendo (SNES) controller port Arduino Nano Shield. This shield is fully equipped to support all types of SNES accessory inputs, like controllers, mice, and multitaps.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/robertdalesmith.webp)

[robertdalesmith](https://flux.ai/robertdalesmith)

projects

iot

esp32

[

Visit project

](https://www.flux.ai/markwuflux/sf-hackathon-2023-bee-hotel-r0p5)[

![3D PCB view of Bee Hotel](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/bee-hotel.webp)

](https://www.flux.ai/markwuflux/sf-hackathon-2023-bee-hotel-r0p5)

[

### Bee Hotel

](https://www.flux.ai/markwuflux/sf-hackathon-2023-bee-hotel-r0p5)

This project intends to bring smart IoT capabilities to homes for native bees so that more people can provide them housing and we can all participate in citizen science to gather more information about the bees!

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mark_wu.webp)

[markwuflux](https://flux.ai/markwuflux)

esp32

projects

iot

[

Visit project

](https://www.flux.ai/vasy_skral/ble-encoder)[

![3D PCB view of Bluetooth Low Energy Encoder](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/ble.webp)

](https://www.flux.ai/vasy_skral/ble-encoder)

[

### Bluetooth Low Energy Encoder

](https://www.flux.ai/vasy_skral/ble-encoder)

Based on SoC ESP32-C3-MINI-1 that allows you to program as HID volume multichannel control.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![vasyl-mochan's Avatar Photo](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

raspberrypi

projects

audio

[

Visit project

](https://www.flux.ai/giulioz/pistrument)[

![3D PCB view of PiStrument](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/pistrument-pcb.webp)

](https://www.flux.ai/giulioz/pistrument)

[

### PiStrument

](https://www.flux.ai/giulioz/pistrument)

Raspberrypi Pico-based sampler, sequencer + drum machine w/ an embedded speaker, Adafruit I2S amplifier and momentary step switches, evoking the tr808 synthesizer

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/giulio.webp)

[giulioz](https://flux.ai/giulioz)

projects

iot

arduino

[

Visit project

](https://www.flux.ai/vasy_skral/usb-c-to-4-usb-a-hub-v1?editor=pcb_3d)[

![3D PCB view of USB-C to 4 USB-A Hub V1](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/usb-c-to-usb-a-hub-pcb.webp)

](https://www.flux.ai/vasy_skral/usb-c-to-4-usb-a-hub-v1?editor=pcb_3d)

[

### USB-C to 4 USB-A Hub V1

](https://www.flux.ai/vasy_skral/usb-c-to-4-usb-a-hub-v1?editor=pcb_3d)

Introducing my USB-C to 4 USB-A Hub V1, a compact and efficient solution for expanding your device's connectivity. Easily connect multiple USB-A peripherals to a single USB-C port. The USB-C and USB-A high-speed differential pairs were done with the help of Flux Automated Impedance Control.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

esp32

projects

[

Visit project

](https://www.flux.ai/jharwinbarrozo/esp32-battery-management-system-controller-board)[

![3D PCB view of ESP32 BMS Controller Board](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/esp32-bms.webp)

](https://www.flux.ai/jharwinbarrozo/esp32-battery-management-system-controller-board)

[

### ESP32 BMS Controller Board

](https://www.flux.ai/jharwinbarrozo/esp32-battery-management-system-controller-board)

A smart ESP32-based battery management system controller board for Li-ion battery packs/cells. Capable of communicating to wide varieties of hybrid-smart inverters with CANbus, RS485, and UART communication.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

stm32

projects

[

Visit project

](https://www.flux.ai/jharwinbarrozo/usb-security-token)[

![3D PCB view of USB Security Token](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/usb-security.webp)

](https://www.flux.ai/jharwinbarrozo/usb-security-token)

[

### USB Security Token

](https://www.flux.ai/jharwinbarrozo/usb-security-token)

USB security token hardware. This hardware token uses an STM32F103TB (ARM Cortex M-3) that can run Gnuk, Neug or u2f-token.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

&

![adrian-coronado's Avatar Photo](https://www.flux.ai/p/assets/misc/people/adrian.webp)

arduino

projects

attiny

[

Visit project

](https://www.flux.ai/adrian95/bms)[

![3D PCB view of BMS](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/bms-board.webp)

](https://www.flux.ai/adrian95/bms)

[

### BMS

](https://www.flux.ai/adrian95/bms)

DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse, and TVS diode to help with voltage spikes. There's an external crystal to the microcontroller (attiny841) which means the device is more reliable in low voltage situations

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/adrian.webp)

[adrian95](https://flux.ai/adrian95)

&

![jackson-ceralde's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jecstronic.webp)

projects

arduino

[

Visit project

](https://www.flux.ai/vasy_skral/excalipad-project)[

![3D PCB view of Excalipad Project](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/excalipad.webp)

](https://www.flux.ai/vasy_skral/excalipad-project)

[

### Excalipad Project

](https://www.flux.ai/vasy_skral/excalipad-project)

Personalized keyboard based on ATMEGA32U4 that can be used in the game Excalipad.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

projects

[

Visit project

](https://www.flux.ai/jecstronic/powerbank-board)[

![3D PCB view of Powerbank Board ](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/powerbank-IP5328P.webp)

](https://www.flux.ai/jecstronic/powerbank-board)

[

### Powerbank Board

](https://www.flux.ai/jecstronic/powerbank-board)

Fully-Integrated Bi-directional PD3.0 and Fast Charge Power Bank SOC with Multiple Input and Output Ports based on IP5328P

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jecstronic.webp)

[jecstronic](https://flux.ai/jecstronic)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

esp32

iot

[

Visit project

](https://www.flux.ai/jecstronic/dfr0478?editor=pcb_3d)[

![3D PCB view of FireBeetle ESP32 IOT Microcontroller](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/DFR0478-pcb.webp)

](https://www.flux.ai/jecstronic/dfr0478?editor=pcb_3d)

[

### FireBeetle ESP32 IOT Microcontroller

](https://www.flux.ai/jecstronic/dfr0478?editor=pcb_3d)

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. FireBeetle Board - ESP32 integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jecstronic.webp)

[jecstronic](https://flux.ai/jecstronic)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

projects

audio

[

Visit project

](https://www.flux.ai/vasy_skral/midi-controller-pcb)[

![3D PCB view of MIDI Controller](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/midi-pcb.webp)

](https://www.flux.ai/vasy_skral/midi-controller-pcb)

[

### MIDI Controller

](https://www.flux.ai/vasy_skral/midi-controller-pcb)

This device will be connected to computer through type-C and recognize as MIDI device. User can change two effects(A and B) from lists, effect speed(Tempo) and volume.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

iot

projects

[

Visit project

](https://www.flux.ai/jharwinbarrozo/16-channel-relay-module)[

![3D PCB view of 16-channel Relay Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/16-ch-relay.webp)

](https://www.flux.ai/jharwinbarrozo/16-channel-relay-module)

[

### 16-channel Relay Module

](https://www.flux.ai/jharwinbarrozo/16-channel-relay-module)

16 channel relay that will allow you to control different types of electrical loads.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

&

![vasyl-mochan's Avatar Photo](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

projects

audio

[

Visit project

](https://www.flux.ai/vasy_skral/mono-audio-amp)[

![3D PCB view of 20W Mono Audio Amp](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/mono-audio-amp.webp)

](https://www.flux.ai/vasy_skral/mono-audio-amp)

[

### 20W Mono Audio Amp

](https://www.flux.ai/vasy_skral/mono-audio-amp)

A 20-Watts Mono Class-D Audio Amplifier powered by TPA3001D1PWPR.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[

Visit project

](https://www.flux.ai/vasyl/air-powered-soft-robots)[

![3D PCB view of Air-powered Soft Robots](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/air-robots_pcb.webp)

](https://www.flux.ai/vasyl/air-powered-soft-robots)

[

### Air-powered Soft Robots

](https://www.flux.ai/vasyl/air-powered-soft-robots)

Board for air-powered soft robots. Board contains 4 air pumps powered by a 12.4v li-on battery and controlled by fixed buttons

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

stm32

iot

projects

[

Visit project

](https://www.flux.ai/vasyl/portable-lorawan-board)[

![3D PCB view of Portable LoRaWAN](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/portable-lorawan-pcb.webp)

](https://www.flux.ai/vasyl/portable-lorawan-board)

[

### Portable LoRaWAN

](https://www.flux.ai/vasyl/portable-lorawan-board)

A board based on LoRa-E5 which can be programmed and has the ability to work autonomously from a battery and a solar panel.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

arduino

projects

audio

[

Visit project

](https://www.flux.ai/ebarranco/arduinomicro-midifreak)[

![3D PCB view of ArduinoMicro MidiFreak](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/midifreak-pcb.webp)

](https://www.flux.ai/ebarranco/arduinomicro-midifreak)

[

### ArduinoMicro MidiFreak

](https://www.flux.ai/ebarranco/arduinomicro-midifreak)

Uses the Arduino Micro as a USB midi controller. It has 1 capacitive touch octave (12 Keys), 2 rotary encoders, a button, and a proximity sensor that can be used as a mod wheel, sustains pedal, or MPE.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/ebarranco.webp)

[ebarranco](https://flux.ai/ebarranco)

projects

[

Visit project

](https://www.flux.ai/vasy_skral/hc32l110b6ya-csp16-breakout-board)[

![3D PCB view of HC32L110B6YA-CSP16 Board](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/HC32L110B6YA.webp)

](https://www.flux.ai/vasy_skral/hc32l110b6ya-csp16-breakout-board)

[

### HC32L110B6YA-CSP16 Board

](https://www.flux.ai/vasy_skral/hc32l110b6ya-csp16-breakout-board)

Breakout board for HC32L110 MCU in 16-CSP package

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

arduino

projects

iot

[

Visit project

](https://www.flux.ai/tpetrovic2/smokesensorshieldcompetition?editor=pcb_3d)[

![3D PCB view of SmokeSensor Shield](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/smoke_sensor_pcb.webp)

](https://www.flux.ai/tpetrovic2/smokesensorshieldcompetition?editor=pcb_3d)

[

### SmokeSensor Shield

](https://www.flux.ai/tpetrovic2/smokesensorshieldcompetition?editor=pcb_3d)

Arduino Uno shield is used to monitor chimney smoke and provide feedback to the stove. This shield powers the Arduino using TEGs and a battery. It also provides power to an LED, fans, and a light sensor used to detect light intensity.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/thomas_p.webp)

[tpetrovic2](https://flux.ai/tpetrovic2)

projects

[

Visit project

](https://www.flux.ai/jlamflux/mt3608-breakout-board-rev-c)[

![3D PCB view of MT3608 Breakout Board](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/MT3608.webp)

](https://www.flux.ai/jlamflux/mt3608-breakout-board-rev-c)

[

### MT3608 Breakout Board

](https://www.flux.ai/jlamflux/mt3608-breakout-board-rev-c)

MT3608 DC-DC Step-Up Converter Booster Power Supply Module Boost Step-up Board MAX output 28V 2A.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jeff-lam.webp)

[jlamflux](https://flux.ai/jlamflux)

projects

[

Visit project

](https://www.flux.ai/jlamflux/lipo-charger-shield-for-arduino-uno-r3-clone-rev-2)[

![3D PCB view of Lipo Charger Arduino Uno R3](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/lipo-charger-arduino-uno-r3.webp)

](https://www.flux.ai/jlamflux/lipo-charger-shield-for-arduino-uno-r3-clone-rev-2)

[

### Lipo Charger Arduino Uno R3

](https://www.flux.ai/jlamflux/lipo-charger-shield-for-arduino-uno-r3-clone-rev-2)

3.7V Lipo Charger. Interfaces with MT3608 Boost Converter to convert 3.7V to 5V. Slot on top of your Arduino and charge your battery while the Arduino is plugged in. Or run your Arduino portably using the battery

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jeff-lam.webp)

[jlamflux](https://flux.ai/jlamflux)

projects

[

Visit project

](https://www.flux.ai/jharwinbarrozo/3v3-regulator-with-led)[

![3D PCB view of 3V3 Voltage Regulator with LED indicator](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/3v3-regulator-pcb.webp)

](https://www.flux.ai/jharwinbarrozo/3v3-regulator-with-led)

[

### 3V3 Voltage Regulator with LED indicator

](https://www.flux.ai/jharwinbarrozo/3v3-regulator-with-led)

A simple fixed linear voltage regulator board that can provide 3.3V up to 1A output and could operate down to 1V input-to-output differential.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

&

![vasyl-skral's Avatar Photo](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

arduino

projects

[

Visit project

](https://www.flux.ai/jecstronic/arduino-pro-mini-328-33v8-mhz)[

![3D PCB view of Arduino Pro Mini 328](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/arduino-pro-mini.webp)

](https://www.flux.ai/jecstronic/arduino-pro-mini-328-33v8-mhz)

[

### Arduino Pro Mini 328

](https://www.flux.ai/jecstronic/arduino-pro-mini-328-33v8-mhz)

Arduino that runs an 8 MHz bootloader on a super small, super thin board.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jecstronic.webp)

[jecstronic](https://flux.ai/jecstronic)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

attiny

arduino

[

Visit project

](https://www.flux.ai/vasyl/attiny85-phone-charge-guard)[

![3D PCB view of Attiny85 Phone Charge Guard](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/attiny85-phone-guard.webp)

](https://www.flux.ai/vasyl/attiny85-phone-charge-guard)

[

### Attiny85 Phone Charge Guard

](https://www.flux.ai/vasyl/attiny85-phone-charge-guard)

The ATtiny45/85 USB Phone Charge Guard regulates charging by monitoring voltage, current, power, and energy, protecting Li-ion batteries.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

attiny

[

Visit project

](https://www.flux.ai/vasyl/attiny85-termo-buzzer-board)[

![3D PCB view of ATtiny85 Thermo Buzzer](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/thermo-buzzer-pcb.webp)

](https://www.flux.ai/vasyl/attiny85-termo-buzzer-board)

[

### ATtiny85 Thermo Buzzer

](https://www.flux.ai/vasyl/attiny85-termo-buzzer-board)

The ATtiny85 Thermo Buzzer Board is a small but powerful tool that can help you prevent dangerous situations caused by high temperatures, making it an essential device for safety-conscious individuals.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

attiny

audio

[

Visit project

](https://www.flux.ai/vasyl/digispark-microphone-sinewave-display)[

![3D PCB view of Digispark Microphone Sinewave Display](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/microphone-sinewave-display-pcb.webp)

](https://www.flux.ai/vasyl/digispark-microphone-sinewave-display)

[

### Digispark Microphone Sinewave Display

](https://www.flux.ai/vasyl/digispark-microphone-sinewave-display)

Real-time sinewave display using Digispark and microphone input. Visualize sound waves in real-time.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

projects

audio

[

Visit project

](https://www.flux.ai/jecstronic/audio-peak-detector-smd)[

![3D PCB view of LMV358 Audio Peak Detector](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/audio-peak-detector.webp)

](https://www.flux.ai/jecstronic/audio-peak-detector-smd)

[

### LMV358 Audio Peak Detector

](https://www.flux.ai/jecstronic/audio-peak-detector-smd)

Simple audio peak detector for electret microphones.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jecstronic.webp)

[jecstronic](https://flux.ai/jecstronic)

&

![adrian-coronado's Avatar Photo](https://www.flux.ai/p/assets/misc/people/adrian.webp)

projects

[

Visit project

](https://www.flux.ai/adrian95/mosfet-board-with-driver)[

![3D PCB view of Mosfet Driver](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/mosfet-w-driver.webp)

](https://www.flux.ai/adrian95/mosfet-board-with-driver)

[

### Mosfet Driver

](https://www.flux.ai/adrian95/mosfet-board-with-driver)

An IR2110 high-side MOSFET driver circuit with output in phase with the input.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/adrian.webp)

[adrian95](https://flux.ai/adrian95)

arduino

templates

[

Visit project

](https://www.flux.ai/vasyl/nrf24l01-shield)[

![3D PCB view of NRF24L01+ Shield](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/NRF24L01-shield.webp)

](https://www.flux.ai/vasyl/nrf24l01-shield)

[

### NRF24L01+ Shield

](https://www.flux.ai/vasyl/nrf24l01-shield)

Arduino UNO NRF24L01+ Shield is specially designed to add wireless connectivity to Arduino UNO.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

projects

[

Visit project

](https://www.flux.ai/vasyl/rotary-encoder)[

![3D PCB view of Rotary Encoder](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/rotary-encoder.webp)

](https://www.flux.ai/vasyl/rotary-encoder)

[

### Rotary Encoder

](https://www.flux.ai/vasyl/rotary-encoder)

A rotary encoder is a position sensor used to determine the angular position of a rotating shaft.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

stm32

projects

[

Visit project

](https://www.flux.ai/vasyl/example-stm32l0-board)[

![3D PCB view of STM32L0 Board](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/stm32l0.webp)

](https://www.flux.ai/vasyl/example-stm32l0-board)

[

### STM32L0 Board

](https://www.flux.ai/vasyl/example-stm32l0-board)

A development board based on STM32L0, an ARM Cortex-M0+ ultra-low-power MCU.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

&

![vasyl-skral's Avatar Photo](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

projects

[

Visit project

](https://www.flux.ai/adrian95/timelapse-timer)[

![3D PCB view of Timelapse Timer](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/timelapse-timer-pcb.webp)

](https://www.flux.ai/adrian95/timelapse-timer)

[

### Timelapse Timer

](https://www.flux.ai/adrian95/timelapse-timer)

Photography Timer based on ATMEGA8-16AU controller, OLED display and button controls.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/adrian.webp)

[adrian95](https://flux.ai/adrian95)

esp32

projects

[

Visit project

](https://www.flux.ai/vasyl/ws2812-board)[

![3D PCB view of WS2812 Board](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/pro-mini.webp)

](https://www.flux.ai/vasyl/ws2812-board)

[

### WS2812 Board

](https://www.flux.ai/vasyl/ws2812-board)

WS2812 board based on ESP32, can be used for projects for identification

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

&

![adrian-coronado's Avatar Photo](https://www.flux.ai/p/assets/misc/people/adrian.webp)

templates

raspberrypi

[

Visit project

](https://www.flux.ai/vasyl/ws2812-hat-rpi)[

![3D PCB view of WS2812 HAT RPI ](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/WS2812-HAT-RPI.webp)

](https://www.flux.ai/vasyl/ws2812-hat-rpi)

[

### WS2812 HAT RPI

](https://www.flux.ai/vasyl/ws2812-hat-rpi)

It's a simple uHAT Raspberry Pi with WS2812 for small projects.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

modules

[

Visit project

](https://www.flux.ai/vasy_skral/adp2302-5v-module?editor=pcb_3d)[

![3D PCB view of ADP2302 5V Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/ADP2302%205V%20Module.webp)

](https://www.flux.ai/vasy_skral/adp2302-5v-module?editor=pcb_3d)

[

### ADP2302 5V Module

](https://www.flux.ai/vasy_skral/adp2302-5v-module?editor=pcb_3d)

This ADP2302-based design is a step-down voltage regulator, converting a higher input voltage to a stable 5V output. Ideal for applications requiring a regulated 5V supply.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

modules

[

Visit project

](https://www.flux.ai/vasy_skral/lm2678sd-5p0-module?editor=pcb_3d)[

![3D PCB view of LM2678SD-5.0 Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/LM2678SD-5.0%20Module.webp)

](https://www.flux.ai/vasy_skral/lm2678sd-5p0-module?editor=pcb_3d)

[

### LM2678SD-5.0 Module

](https://www.flux.ai/vasy_skral/lm2678sd-5p0-module?editor=pcb_3d)

This LM2678SD-5.0 reference design is a step-down voltage regulator providing a stable 5V output from a higher input voltage. Ideal for applications needing a regulated 5V supply.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

modules

[

Visit project

](https://www.flux.ai/vasy_skral/lm2679-5v-module?editor=pcb_3d)[

![3D PCB view of LM2679 5V Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/LM2679%205V%20Module.webp)

](https://www.flux.ai/vasy_skral/lm2679-5v-module?editor=pcb_3d)

[

### LM2679 5V Module

](https://www.flux.ai/vasy_skral/lm2679-5v-module?editor=pcb_3d)

This LM2679SX-ADJ reference design is a step-down voltage regulator providing a stable 5V output from a higher input voltage. Ideal for applications needing a regulated 5V supply.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

modules

[

Visit project

](https://www.flux.ai/vasyl/lm27313xmf-module?editor=pcb_3d)[

![3D PCB view of LM27313XMF Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/LM27313XMF%20Module%20PCB.webp)

](https://www.flux.ai/vasyl/lm27313xmf-module?editor=pcb_3d)

[

### LM27313XMF Module

](https://www.flux.ai/vasyl/lm27313xmf-module?editor=pcb_3d)

This is a module of the LM27313 boost converter with an input voltage of 5V and output of 12V 0.25A

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

modules

[

Visit project

](https://www.flux.ai/vasyl/lm3481qmmx-module?editor=pcb_3d)[

![3D PCB view of LM3481QMMX Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/LM3481QMMX%20Module%20PCB.webp)

](https://www.flux.ai/vasyl/lm3481qmmx-module?editor=pcb_3d)

[

### LM3481QMMX Module

](https://www.flux.ai/vasyl/lm3481qmmx-module?editor=pcb_3d)

This is a boost converter module based on LM3481 with 5V input and 12V 1.8A output voltage.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

modules

[

Visit project

](https://www.flux.ai/vasyl/lmzm23601-module?editor=pcb_3d)[

![3D PCB view of LMZM23601 Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/LMZM23601%20Module%20PCB.webp)

](https://www.flux.ai/vasyl/lmzm23601-module?editor=pcb_3d)

[

### LMZM23601 Module

](https://www.flux.ai/vasyl/lmzm23601-module?editor=pcb_3d)

This is a module of the LMZM23601 chip with a fixed output voltage value that you can use in your project to quickly develop your prototype.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

modules

[

Visit project

](https://www.flux.ai/vasy_skral/ltc3547-module?editor=pcb_2d)[

![3D PCB view of LTC3547 Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/LTC3547%20Module.webp)

](https://www.flux.ai/vasy_skral/ltc3547-module?editor=pcb_2d)

[

### LTC3547 Module

](https://www.flux.ai/vasy_skral/ltc3547-module?editor=pcb_2d)

This project is a dual-output step-down voltage regulator based on the LTC3547 IC, designed to efficiently convert a higher input voltage to stable 2.5V and 1.8V output voltages. It is suitable for applications requiring regulated power supplies with multiple voltage levels.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

modules

[

Visit project

](https://www.flux.ai/vasy_skral/tps5420d-module?editor=pcb_3d)[

![3D PCB view of TPS5420D Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/TPS5420D%20Module%20PCB.webp)

](https://www.flux.ai/vasy_skral/tps5420d-module?editor=pcb_3d)

[

### TPS5420D Module

](https://www.flux.ai/vasy_skral/tps5420d-module?editor=pcb_3d)

This TPS5420D reference design is a step-down voltage regulator providing a stable 5V output from a higher input voltage. It uses capacitors, an inductor, and a diode for filtering and protection, with an EN terminal for control. Ideal for applications needing a regulated 5V supply.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

modules

[

Visit project

](https://www.flux.ai/vasy_skral/tps5430-5v-module?editor=pcb_3d)[

![3D PCB view of TPS5430 5V Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/TPS5430%205V%20Module.webp)

](https://www.flux.ai/vasy_skral/tps5430-5v-module?editor=pcb_3d)

[

### TPS5430 5V Module

](https://www.flux.ai/vasy_skral/tps5430-5v-module?editor=pcb_3d)

This TPS5430DDA-based design is a step-down voltage regulator, converting a higher input voltage to a stable 5V output. Ideal for applications requiring a regulated 5V supply.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

modules

[

Visit project

](https://www.flux.ai/vasyl/tps61032rsar-module?editor=pcb_3d)[

![3D PCB view of TPS61032RSAR Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/TPS61032RSAR%20Module%20PCB.webp)

](https://www.flux.ai/vasyl/tps61032rsar-module?editor=pcb_3d)

[

### TPS61032RSAR Module

](https://www.flux.ai/vasyl/tps61032rsar-module?editor=pcb_3d)

This is a TPS6103x module based 96% efficient 4A switch synchronous boost converter module.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

modules

[

Visit project

](https://www.flux.ai/vasyl/tps61085-module?editor=pcb_3d)[

![3D PCB view of TPS61085 Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/TPS61085%20Module%20PCB.webp)

](https://www.flux.ai/vasyl/tps61085-module?editor=pcb_3d)

[

### TPS61085 Module

](https://www.flux.ai/vasyl/tps61085-module?editor=pcb_3d)

This is a module of a TPS61085-based voltage booster with an output voltage of 12V 0.3A

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

modules

[

Visit project

](https://www.flux.ai/vasyl/tps61070ddcrg4-module?editor=pcb_3d)[

![3D PCB view of TPS61070DDCRG4 Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/TPS61070DDCRG4%20Module%20PCB.webp)

](https://www.flux.ai/vasyl/tps61070ddcrg4-module?editor=pcb_3d)

[

### TPS61070DDCRG4 Module

](https://www.flux.ai/vasyl/tps61070ddcrg4-module?editor=pcb_3d)

This is a compact and reliable module of the boost converter TPS61070 with a fixed output voltage of 3.3V and a current of 0.1A

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

modules

[

Visit project

](https://www.flux.ai/vasyl/tps61165-module?editor=pcb_3d)[

![3D PCB view of TPS61165 Module](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/TPS61165%20Module.webp)

](https://www.flux.ai/vasyl/tps61165-module?editor=pcb_3d)

[

### TPS61165 Module

](https://www.flux.ai/vasyl/tps61165-module?editor=pcb_3d)

This is a module boost DC-DC Regulator with 12V 0.3A(1.2A) output and 5V input voltage

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

arduino

templates

[

Visit project

](https://www.flux.ai/vasyl/abx00027-template)[

![3D PCB view of ABX00027 Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/ABX00027.webp)

](https://www.flux.ai/vasyl/abx00027-template)

[

### ABX00027 Template

](https://www.flux.ai/vasyl/abx00027-template)

ATSAMD21G18A Arduino Nano 33 IoT SAM D ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

arduino

templates

[

Visit project

](https://www.flux.ai/vasy_skral/arduino-atmega328p-mu-template)[

![3D PCB view of Arduino ATMEGA328P-MU Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/atmega328.webp)

](https://www.flux.ai/vasy_skral/arduino-atmega328p-mu-template)

[

### Arduino ATMEGA328P-MU Template

](https://www.flux.ai/vasy_skral/arduino-atmega328p-mu-template)

Arduino Template based on ATMEGA328P-MU. This template is a good starting point for your Arduino-based project.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

templates

arduino

[

Visit project

](https://www.flux.ai/vasy_skral/arduino-mega2560-shield-template)[

![3D PCB view of Arduino Mega 2560 Shield Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/mega2560-3d.webp)

](https://www.flux.ai/vasy_skral/arduino-mega2560-shield-template)

[

### Arduino Mega 2560 Shield Template

](https://www.flux.ai/vasy_skral/arduino-mega2560-shield-template)

Template for Arduino Mega2560 Shield. On PCB you can find the board outline on the silkscreen.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

arduino

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/arduino-micro-template)[

![3D PCB view of Arduino Micro Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/Arduino-Micro.webp)

](https://www.flux.ai/jharwinbarrozo/arduino-micro-template)

[

### Arduino Micro Template

](https://www.flux.ai/jharwinbarrozo/arduino-micro-template)

Template for ATmega32U4 Arduino Micro AVR® ATmega AVR MCU 8-Bit Embedded Evaluation Board.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

arduino

templates

[

Visit project

](https://www.flux.ai/vasyl/arduino-mkr-zero-template)[

![3D PCB view of Arduino MKR Zero Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/arduinomkr-zero.webp)

](https://www.flux.ai/vasyl/arduino-mkr-zero-template)

[

### Arduino MKR Zero Template

](https://www.flux.ai/vasyl/arduino-mkr-zero-template)

The MKR Zero board is a great board for getting started with various music projects.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

arduino

templates

iot

[

Visit project

](https://www.flux.ai/vasyl/arduino-mkr-wifi-1010-template)[

![3D PCB view of Arduino MKR Wifi 1010 Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/Arduino-MKR-Wifi-1010.webp)

](https://www.flux.ai/vasyl/arduino-mkr-wifi-1010-template)

[

### Arduino MKR Wifi 1010 Template

](https://www.flux.ai/vasyl/arduino-mkr-wifi-1010-template)

Template for Arduino MKR Wifi 1010. With its BLE capabilities, the MKR WiFi 1010 is your one-stop solution for many of the basic IoT application scenarios.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

arduino

iot

templates

raspberrypi

[

Visit project

](https://www.flux.ai/jharwinbarrozo/arduino-nano-rp2040-connect-template)[

![3D PCB view of Arduino Nano RP2040 Connect Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/rp2040-nano-connect-3d.webp)

](https://www.flux.ai/jharwinbarrozo/arduino-nano-rp2040-connect-template)

[

### Arduino Nano RP2040 Connect Template

](https://www.flux.ai/jharwinbarrozo/arduino-nano-rp2040-connect-template)

Meet the only connected RP2040 board, which is the same mcu for Raspberry Pi Pico. It fits the Arduino Nano form factor making it a small board with BIG features. The brain of the board is the the Raspberry Pi RP2040.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

arduino

templates

[

Visit project

](https://www.flux.ai/vasyl/arduino-mkr-vidor-4000-template)[

![3D PCB view of Arduino MKR Vidor 4000 Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/Arduino-MKR-Vidor-4000.webp)

](https://www.flux.ai/vasyl/arduino-mkr-vidor-4000-template)

[

### Arduino MKR Vidor 4000 Template

](https://www.flux.ai/vasyl/arduino-mkr-vidor-4000-template)

Template for Arduino MKR vidor 4000. Powered by Intel Cyclone 10CL016; it contains 16K logic elements, 504 KB of embedded RAM, and 56 18x18 bit HW multipliers for high-speed DSP operations.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

arduino

templates

[

Visit project

](https://www.flux.ai/vasy_skral/arduino-uno-r3-shield-template)[

![3D PCB view of Arduino Uno R3 Shield Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/Arduino-Uno-R3-Shield-Template.webp)

](https://www.flux.ai/vasy_skral/arduino-uno-r3-shield-template)

[

### Arduino Uno R3 Shield Template

](https://www.flux.ai/vasy_skral/arduino-uno-r3-shield-template)

Template for Arduino Uno R3 Shield. Include an official pinout so you will always know Arduino names, the alternative roles of pins, which one is SDA, or SCL, etc.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

&

![jharwin-barrozo's Avatar Photo](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

parts

[

Visit project

](https://www.flux.ai/jharwinbarrozo/generic-resistor?editor=pcb_2d)[

![3D PCB view of Generic Resistor](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/637bd198b6887b45c60971db_generic-resistor-symbol.webp)

](https://www.flux.ai/jharwinbarrozo/generic-resistor?editor=pcb_2d)

[

### Generic Resistor

](https://www.flux.ai/jharwinbarrozo/generic-resistor?editor=pcb_2d)

A generic fixed resistor for rapidly developing circuit topology. You can choose which footprint you want at the top level.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

arduino

[

Visit project

](https://www.flux.ai/vasy_skral/mgm240s-template?editor=pcb_3d)[

![3D PCB view of MGM240S Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/MGM240S_template.webp)

](https://www.flux.ai/vasy_skral/mgm240s-template?editor=pcb_3d)

[

### MGM240S Template

](https://www.flux.ai/vasy_skral/mgm240s-template?editor=pcb_3d)

This project focuses on setting up an MGM240S-based circuit for Arduino Matter applications, featuring key programming and power nets, and a mix of digital and analog connections.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/vasyl.webp)

[vasy\_skral](https://flux.ai/vasy_skral)

arduino

[

Visit project

](https://www.flux.ai/vasyl/mgm240p-template?editor=pcb_3d)[

![3D PCB view of MGM240P Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/MGM240P_template.webp)

](https://www.flux.ai/vasyl/mgm240p-template?editor=pcb_3d)

[

### MGM240P Template

](https://www.flux.ai/vasyl/mgm240p-template?editor=pcb_3d)

This is the MGM240P template with minimal configuration for operation. There is a 3.3V regulator, a connector for UART and SWD

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

manufacturer-design-rules

[

Visit project

](https://www.flux.ai/nextpcb/nextpcb-1-4-layer-standard-constraints)[

![3D PCB view of NextPCB 1-4 Layer Standard Constraints](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/nextpcb-1-4-std.webp)

](https://www.flux.ai/nextpcb/nextpcb-1-4-layer-standard-constraints)

[

### NextPCB 1-4 Layer Standard Constraints

](https://www.flux.ai/nextpcb/nextpcb-1-4-layer-standard-constraints)

Use this template if you plan to get your 1-4 layer boards manufactured with HQ NextPCB (nextpcb.com). This template is designed for generic designs to minimize unnecessary costs and complications where possible.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/nextpcb.webp)

[nextpcb](https://flux.ai/nextpcb)

manufacturer-design-rules

[

Visit project

](https://www.flux.ai/nextpcb/nextpcb-1-4-layer-complex-constraints)[

![3D PCB view of NextPCB 1-4 Layer Complex Constraints](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/nextpcb-1-4-complex.webp)

](https://www.flux.ai/nextpcb/nextpcb-1-4-layer-complex-constraints)

[

### NextPCB 1-4 Layer Complex Constraints

](https://www.flux.ai/nextpcb/nextpcb-1-4-layer-complex-constraints)

Use this template if you plan to get your 1-4 layer boards manufactured with HQ NextPCB (nextpcb.com) and require advanced manufacturing capabilities. Please inquire for even more advanced capabilities.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/nextpcb.webp)

[nextpcb](https://flux.ai/nextpcb)

manufacturer-design-rules

[

Visit project

](https://www.flux.ai/nextpcb/nextpcb-1-6-layer-basic-constraints)[

![3D PCB view of NextPCB 1-6 Layer BASIC Constraints](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/nextpcb-1-6-basic.webp)

](https://www.flux.ai/nextpcb/nextpcb-1-6-layer-basic-constraints)

[

### NextPCB 1-6 Layer BASIC Constraints

](https://www.flux.ai/nextpcb/nextpcb-1-6-layer-basic-constraints)

Use this template if you're planning to get your 1-6 layer boards manufactured with HQ NextPCB (nextpcb.com). This template is designed to reduce costs and qualify for our special pricing where possible. PCB dimensions must be between 30 x 30 to 100 x 100mm

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/nextpcb.webp)

[nextpcb](https://flux.ai/nextpcb)

manufacturer-design-rules

[

Visit project

](https://www.flux.ai/nextpcb/nextpcb-6plus-layer-complex-constraints)[

![3D PCB view of NextPCB 6+ Layer Complex Constraints](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/nextpcb-6plus-complex.webp)

](https://www.flux.ai/nextpcb/nextpcb-6plus-layer-complex-constraints)

[

### NextPCB 6+ Layer Complex Constraints

](https://www.flux.ai/nextpcb/nextpcb-6plus-layer-complex-constraints)

Use this template if you plan to get your 6+ layer boards manufactured with HQ NextPCB (nextpcb.com) and require advanced manufacturing capabilities. Please inquire for even more advanced capabilities.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/nextpcb.webp)

[nextpcb](https://flux.ai/nextpcb)

manufacturer-design-rules

[

Visit project

](https://www.flux.ai/nextpcb/nextpcb-6plus-layer-standard-constraints)[

![3D PCB view of NextPCB 6+ Layer Standard Constraints](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/nextpcb-6plus-std.webp)

](https://www.flux.ai/nextpcb/nextpcb-6plus-layer-standard-constraints)

[

### NextPCB 6+ Layer Standard Constraints

](https://www.flux.ai/nextpcb/nextpcb-6plus-layer-standard-constraints)

Use this template if you plan to get your 6+ layer boards manufactured with HQ NextPCB (nextpcb.com). This template is designed for generic designs to minimize unnecessary costs and complications where possible.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/nextpcb.webp)

[nextpcb](https://flux.ai/nextpcb)

stm32

templates

[

Visit project

](https://www.flux.ai/vasyl/nucleo-f303k8-template)[

![3D PCB view of NUCLEO F303K8 Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/NUCLEO-F303K8.webp)

](https://www.flux.ai/vasyl/nucleo-f303k8-template)

[

### NUCLEO F303K8 Template

](https://www.flux.ai/vasyl/nucleo-f303k8-template)

STM32 Nucleo-32 development board with STM32F303K8 MCU, supports Arduino nano connectivity.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/mrmo.webp)

[vasyl](https://flux.ai/vasyl)

templates

esp32

[

Visit project

](https://www.flux.ai/particle/particle-argon?editor=pcb_3d)[

![3D PCB view of Particle Argon](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/particle_argon-template.webp)

](https://www.flux.ai/particle/particle-argon?editor=pcb_3d)

[

### Particle Argon

](https://www.flux.ai/particle/particle-argon?editor=pcb_3d)

The Argon is a powerful Wi-Fi enabled development board for Wi-Fi networks. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/particle.webp)

[particle](https://flux.ai/particle)

templates

iot

[

Visit project

](https://www.flux.ai/particle/particle-photon-2?editor=pcb_3d)[

![3D PCB view of Particle Photon 2](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/particle_photon2-template.webp)

](https://www.flux.ai/particle/particle-photon-2?editor=pcb_3d)

[

### Particle Photon 2

](https://www.flux.ai/particle/particle-photon-2?editor=pcb_3d)

The Photon 2 is a development module with a microcontroller and Wi-Fi networking. The form-factor is similar to the Argon (Adafruit Feather), but the Photon 2 supports 2.4 GHz and 5 GHz Wi-Fi, BLE, and has much larger RAM and flash that can support larger applications.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/particle.webp)

[particle](https://flux.ai/particle)

templates

iot

raspberrypi

[

Visit project

](https://www.flux.ai/nico/raspberry-pi-2-3-4-model-b-template)[

![3D PCB view of Raspberry Pi 2 3 4 model B template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/raspb234.webp)

](https://www.flux.ai/nico/raspberry-pi-2-3-4-model-b-template)

[

### Raspberry Pi 2 3 4 model B template

](https://www.flux.ai/nico/raspberry-pi-2-3-4-model-b-template)

Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/nico.webp)

[nico](https://flux.ai/nico)

templates

iot

raspberrypi

[

Visit project

](https://www.flux.ai/jharwinbarrozo/raspberry-pi-pico-2-shield-template)[

![3D PCB view of RPi Pico 2 Shield Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/rpi-pico-shield.webp)

](https://www.flux.ai/jharwinbarrozo/raspberry-pi-pico-2-shield-template)

[

### RPi Pico 2 Shield Template

](https://www.flux.ai/jharwinbarrozo/raspberry-pi-pico-2-shield-template)

The Raspberry Pi Pico 2 is equipped with the RP2350, a cutting-edge, high-performance microcontroller designed with enhanced security and versatility in mind.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

templates

iot

raspberrypi

[

Visit project

](https://www.flux.ai/jharwinbarrozo/raspberry-pi-pico-shield-template)[

![3D PCB view of RPi Pico Shield Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/rpi-pico-shield.webp)

](https://www.flux.ai/jharwinbarrozo/raspberry-pi-pico-shield-template)

[

### RPi Pico Shield Template

](https://www.flux.ai/jharwinbarrozo/raspberry-pi-pico-shield-template)

The Raspberry Pi Pico series features a range of compact, high-performance boards powered by the RP2040 chip.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

teensy

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/rt1062-teensy-41-template)[

![3D PCB view of RT1062 Teensy 4.1 Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/RT1062-Teensy-4.1.webp)

](https://www.flux.ai/jharwinbarrozo/rt1062-teensy-41-template)

[

### RT1062 Teensy 4.1 Template

](https://www.flux.ai/jharwinbarrozo/rt1062-teensy-41-template)

RT1062 Teensy 4.1 series ARM® Cortex®-M7 MPU Embedded Evaluation Board.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

esp8266

templates

iot

[

Visit project

](https://www.flux.ai/jharwinbarrozo/wemos-d1-mini-template)[

![3D PCB view of Wemos D1 Mini Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/wemos-d1-mini.webp)

](https://www.flux.ai/jharwinbarrozo/wemos-d1-mini-template)

[

### Wemos D1 Mini Template

](https://www.flux.ai/jharwinbarrozo/wemos-d1-mini-template)

Template for wemos D1 mini. A mini wifi board with 4MB flash based on ESP-8266EX.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

iot

raspberrypi

[

Visit project

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-rp2350?editor=pcb_3d)[

![3D PCB view of Seeed Studio XIAO RP2350](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/xiao-rp2350-pcb.webp)

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-rp2350?editor=pcb_3d)

[

### Seeed Studio XIAO RP2350

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-rp2350?editor=pcb_3d)

Measuring just 21x17.5mm, the XIAO RP2350 packs the power of the Raspberry Pi Pico 2 RP2350 (switchable architecture of dual Arm Cortex-M33 cores running at 150MHz with FPU, and dual open-hardware Hazard3 RISC‑V cores, enhanced security and encryption) into the classic XIAO form factor.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/seeedstudio.webp)

[seeedstudio](https://flux.ai/seeedstudio)

iot

raspberrypi

[

Visit project

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-rp2040?editor=pcb_3d)[

![3D PCB view of Seeed Studio XIAO RP2040](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/xiao-rp2040-pcb.webp)

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-rp2040?editor=pcb_3d)

[

### Seeed Studio XIAO RP2040

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-rp2040?editor=pcb_3d)

The Seeed Studio XIAO RP2040 is as small as the XIAO SAMD21 but it's more powerful. It carry the powerful Dual-core Raspberry Pi Pico RP2040 processor that can flexible clock running up to 133 MHz. It has also 264KB of SRAM, and 2MB of on-board Flash memory. This can be used for wearable devices.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/seeedstudio.webp)

[seeedstudio](https://flux.ai/seeedstudio)

iot

[

Visit project

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-nrf52840?editor=pcb_3d)[

![3D PCB view of Seeed Studio XIAO nRF52840](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/nRF52840-sense-pcb.webp)

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-nrf52840?editor=pcb_3d)

[

### Seeed Studio XIAO nRF52840

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-nrf52840?editor=pcb_3d)

Seeed Studio XIAO nRF52840 Sense carries Bluetooth 5.0 wireless capability and can operate with low power consumption. It will be your best microcontroller for Bluetooth applications.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/seeedstudio.webp)

[seeedstudio](https://flux.ai/seeedstudio)

iot

[

Visit project

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-nrf52840-sense?editor=pcb_3d)[

![3D PCB view of Seeed Studio XIAO nRF52840 Sense](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/nRF52840-sense-pcb.webp)

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-nrf52840-sense?editor=pcb_3d)

[

### Seeed Studio XIAO nRF52840 Sense

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-nrf52840-sense?editor=pcb_3d)

Seeed Studio XIAO nRF52840 Sense carries Bluetooth 5.0 wireless capability and can operate with low power consumption. Featuring onboard IMU and PDM, it can be your best tool for embedded Machine Learning projects.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/seeedstudio.webp)

[seeedstudio](https://flux.ai/seeedstudio)

iot

esp32

[

Visit project

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-esp32s3-sense?editor=pcb_3d)[

![3D PCB view of Seeed Studio XIAO ESP32S3 Sense](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/esp32s3-sense-pcb.webp)

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-esp32s3-sense?editor=pcb_3d)

[

### Seeed Studio XIAO ESP32S3 Sense

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-esp32s3-sense?editor=pcb_3d)

Seeed Studio XIAO ESP32S3 leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE, battery charging. It integrates built-in camera sensor, digital microphone, and external SD card slot. Suitable for embedded ML, like intelligent voice and vision AI.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/seeedstudio.webp)

[seeedstudio](https://flux.ai/seeedstudio)

iot

esp32

[

Visit project

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-esp32s3?editor=pcb_3d)[

![3D PCB view of Seeed Studio XIAO ESP32S3](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/xiao-esp32s3-pcb.webp)

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-esp32s3?editor=pcb_3d)

[

### Seeed Studio XIAO ESP32S3

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-esp32s3?editor=pcb_3d)

Seeed Studio XIAO ESP32S3 leverages 240MHz Xtensa 32-bit LX7 dual-core processor, supporting both WiFi and BLE 5.0 wireless connectivities, a 2.4GHz Rod antenna, allows for deep sleep mode with power consumption as low as 14μA.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/seeedstudio.webp)

[seeedstudio](https://flux.ai/seeedstudio)

iot

esp32

[

Visit project

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-esp32c3?editor=pcb_3d)[

![3D PCB view of Seeed Studio XIAO ESP32C3](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/xiao-esp32c3-pcb.webp)

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-esp32c3?editor=pcb_3d)

[

### Seeed Studio XIAO ESP32C3

](https://www.flux.ai/seeedstudio/seeed-studio-xiao-esp32c3?editor=pcb_3d)

Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivity. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/seeedstudio.webp)

[seeedstudio](https://flux.ai/seeedstudio)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/2-layer-lion-circuits)[

![3D PCB view of Lion Circuits 2-layer Stackup](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/lion-circuits-2L.webp)

](https://www.flux.ai/jharwinbarrozo/2-layer-lion-circuits)

[

### Lion Circuits 2-layer Stackup

](https://www.flux.ai/jharwinbarrozo/2-layer-lion-circuits)

Clone or fork this template as the starting point for your 2-layer board project to be produced with Lion Circuits. It includes Lion Circuits Mii Service manufacturing constraints as global rules.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/4-layer-lion-circuits)[

![3D PCB view of Lion Circuits 4-layer Stackup](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/lion-circuits-4L.webp)

](https://www.flux.ai/jharwinbarrozo/4-layer-lion-circuits)

[

### Lion Circuits 4-layer Stackup

](https://www.flux.ai/jharwinbarrozo/4-layer-lion-circuits)

Clone or fork this template as the starting point for your 4-layer board project to be produced with Lion Circuits. It includes Lion Circuits Mii Service manufacturing constraints as global rules.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/aisler/aisler-2-layer-1p6mm-hasl-drc)[

![3D PCB view of AISLER 2 Layer 1.6mm HASL DRC](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/aisler-2l.webp)

](https://www.flux.ai/aisler/aisler-2-layer-1p6mm-hasl-drc)

[

### AISLER 2 Layer 1.6mm HASL DRC

](https://www.flux.ai/aisler/aisler-2-layer-1p6mm-hasl-drc)

Use this template if you're planning to get your 2-layer board manufactured with AISLER. All design rules are prebaked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/aisler-avatar.webp)

[aisler](https://flux.ai/aisler)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/aisler/aisler-2-layer-1p6mm-enig-drc)[

![3D PCB view of AISLER 2 Layer 1.6mm ENIG DRC](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/aisler-2l.webp)

](https://www.flux.ai/aisler/aisler-2-layer-1p6mm-enig-drc)

[

### AISLER 2 Layer 1.6mm ENIG DRC

](https://www.flux.ai/aisler/aisler-2-layer-1p6mm-enig-drc)

Use this template if you're planning to get your 2-layer board manufactured with AISLER. All design rules are prebaked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/aisler-avatar.webp)

[aisler](https://flux.ai/aisler)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/pcbway-4-layer-stackup)[

![3D PCB view of PCBWay 4 Layer Stackup Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/pcbway-4L.webp)

](https://www.flux.ai/jharwinbarrozo/pcbway-4-layer-stackup)

[

### PCBWay 4 Layer Stackup Template

](https://www.flux.ai/jharwinbarrozo/pcbway-4-layer-stackup)

Simply clone or fork this template if you're planning to get your 4-layer board manufactured in PCBWay. All design rules are pre-baked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/pcbway-6-layer-stackup)[

![3D PCB view of PCBWay 6 Layer Stackup Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/pcbway-6L.webp)

](https://www.flux.ai/jharwinbarrozo/pcbway-6-layer-stackup)

[

### PCBWay 6 Layer Stackup Template

](https://www.flux.ai/jharwinbarrozo/pcbway-6-layer-stackup)

Simply clone or fork this template if you're planning to get your 6-layer board manufactured in PCBWay. All design rules are pre-baked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/aisler/aisler-4-layer-1p6mm-enig-drc)[

![3D PCB view of AISLER 4 Layer 1.6mm ENIG DRC](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/aisler-4l.webp)

](https://www.flux.ai/aisler/aisler-4-layer-1p6mm-enig-drc)

[

### AISLER 4 Layer 1.6mm ENIG DRC

](https://www.flux.ai/aisler/aisler-4-layer-1p6mm-enig-drc)

Use this template if you're planning to get your 4-layer board manufactured with AISLER. All design rules are prebaked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/aisler-avatar.webp)

[aisler](https://flux.ai/aisler)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/seeedstudio/seeed-studio-6-layer-stackup)[

![3D PCB view of Seeed Studio 6-layer Stackup](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/seeed_6l.webp)

](https://www.flux.ai/seeedstudio/seeed-studio-6-layer-stackup)

[

### Seeed Studio 6-layer Stackup

](https://www.flux.ai/seeedstudio/seeed-studio-6-layer-stackup)

To optimize your 6-layer board manufacturing process with Seeed Studio Fusion, utilize this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/seeedstudio.webp)

[seeedstudio](https://flux.ai/seeedstudio)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/seeedstudio/seeed-studio-4-layer-stackup)[

![3D PCB view of Seeed Studio 4-layer Stackup](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/seeed_4l.webp)

](https://www.flux.ai/seeedstudio/seeed-studio-4-layer-stackup)

[

### Seeed Studio 4-layer Stackup

](https://www.flux.ai/seeedstudio/seeed-studio-4-layer-stackup)

To optimize your 4-layer board manufacturing process with Seeed Studio Fusion, simply clone or fork this comprehensive template. It incorporates a majority of the essential manufacturing constraints as global rules, ensuring a smoother and more efficient production workflow.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/seeedstudio.webp)

[seeedstudio](https://flux.ai/seeedstudio)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/multi-layer-jlcpcb-constraints)[

![3D PCB view of JLCPCB Multi-layer Stackup](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/jlcpcb-multil.webp)

](https://www.flux.ai/jharwinbarrozo/multi-layer-jlcpcb-constraints)

[

### JLCPCB Multi-layer Stackup

](https://www.flux.ai/jharwinbarrozo/multi-layer-jlcpcb-constraints)

Template if you're planning to get your multi-layer board manufactured in JLCPCB. All design rules are prebaked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/2-layer-jlcpcb-constraints)[

![3D PCB view of JLCPCB 2-layer Stackup](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/jlcpcb-2l.webp)

](https://www.flux.ai/jharwinbarrozo/2-layer-jlcpcb-constraints)

[

### JLCPCB 2-layer Stackup

](https://www.flux.ai/jharwinbarrozo/2-layer-jlcpcb-constraints)

Template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. All design rules are prebaked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/2-layer-oshpark-constraints)[

![3D PCB view of OSHPARK 2-layer Stackup](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/oshpark-2l.webp)

](https://www.flux.ai/jharwinbarrozo/2-layer-oshpark-constraints)

[

### OSHPARK 2-layer Stackup

](https://www.flux.ai/jharwinbarrozo/2-layer-oshpark-constraints)

Template if you're planning to get your 2-layer board manufactured in OSHPARK. All design rules are prebaked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/4-layer-oshpark-constraints)[

![3D PCB view of OSHPARK 4-layer Stackup](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/oshpark-4l.webp)

](https://www.flux.ai/jharwinbarrozo/4-layer-oshpark-constraints)

[

### OSHPARK 4-layer Stackup

](https://www.flux.ai/jharwinbarrozo/4-layer-oshpark-constraints)

Template if you're planning to get your 4-layer board manufactured in OSHPARK. All design rules are prebaked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/6-layer-oshpark-constraints)[

![3D PCB view of OSHPARK 6-layer Stackup](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/oshpark-6l.webp)

](https://www.flux.ai/jharwinbarrozo/6-layer-oshpark-constraints)

[

### OSHPARK 6-layer Stackup

](https://www.flux.ai/jharwinbarrozo/6-layer-oshpark-constraints)

Template if you're planning to get your 6-layer board manufactured in OSHPARK. All design rules are prebaked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/pcbway-4-layer-hdi-stackup-template)[

![3D PCB view of PCBWay 4 Layer HDI Stackup Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/pcbway-4L-HDI.webp)

](https://www.flux.ai/jharwinbarrozo/pcbway-4-layer-hdi-stackup-template)

[

### PCBWay 4 Layer HDI Stackup Template

](https://www.flux.ai/jharwinbarrozo/pcbway-4-layer-hdi-stackup-template)

Simply clone or fork this template if you're planning to get your 4-layer HDI board manufactured in PCBWay. All design rules are pre-baked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/pcbway-6-layer-hdi-stackup-template)[

![3D PCB view of PCBWay 6 Layer HDI Stackup Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/pcbway-6L-HDI.webp)

](https://www.flux.ai/jharwinbarrozo/pcbway-6-layer-hdi-stackup-template)

[

### PCBWay 6 Layer HDI Stackup Template

](https://www.flux.ai/jharwinbarrozo/pcbway-6-layer-hdi-stackup-template)

Simply clone or fork this template if you're planning to get your 6-layer HDI board manufactured in PCBWay. All design rules are pre-baked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/victorypcb-4-layer-hdi-stackup-template)[

![3D PCB view of VictoryPCB 4 Layer HDI Stackup Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/victorypcb-4L-HDI.webp)

](https://www.flux.ai/jharwinbarrozo/victorypcb-4-layer-hdi-stackup-template)

[

### VictoryPCB 4 Layer HDI Stackup Template

](https://www.flux.ai/jharwinbarrozo/victorypcb-4-layer-hdi-stackup-template)

Simply clone or fork this template if you're planning to get your 4-layer HDI board manufactured in VictoryPCB. All design rules are pre-baked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)

manufacturer-design-rules

templates

[

Visit project

](https://www.flux.ai/jharwinbarrozo/victorypcb-6-layer-hdi-stackup-template)[

![3D PCB view of VictoryPCB 6 Layer HDI Stackup Template](https://www.flux.ai/p/assets/featured_projects/pcb3d_preview/victorypcb-6L-HDI.webp)

](https://www.flux.ai/jharwinbarrozo/victorypcb-6-layer-hdi-stackup-template)

[

### VictoryPCB 6 Layer HDI Stackup Template

](https://www.flux.ai/jharwinbarrozo/victorypcb-6-layer-hdi-stackup-template)

Simply clone or fork this template if you're planning to get your 6-layer HDI board manufactured in VictoryPCB. All design rules are pre-baked into this template.

![Profile avatar of project creator](https://www.flux.ai/p/assets/misc/people/jharwin.webp)

[jharwinbarrozo](https://flux.ai/jharwinbarrozo)