# RCA breakout ## Description Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules ## Project Details - **Owner:** opium - **Created:** 1/6/2025 - **Last Updated:** 1/19/2025 - **Visibility:** Public ## Key Components ### — [M2 Mounting Hole](https://www.flux.ai/vasyl/m2-mounting-hole~st.md) **Pins:** - ~ ### — [M2 Mounting Hole](https://www.flux.ai/vasyl/m2-mounting-hole~st.md) **Pins:** - ~ ### IN — [Pin Header 01x02 2.54mm Vertical](https://www.flux.ai/jharwinbarrozo/generic-pin-header-01x02-2p54mm-vertical~4uy.md) - License: https://creativecommons.org/licenses/by/4.0/ - Part Type: Connector **Pins:** - P1 [pin 1] - P2 [pin 2] ### OUT — [RCJ-041](https://www.flux.ai/adrian95/rcj-041~n1m.md) - Part Type: Connector - Manufacturer Name: CUI Devices - License: https://creativecommons.org/licenses/by/4.0/ - Manufacturer Part Number: RCJ-041 - Datasheet URL: https://www.cuidevices.com/product/resource/rcj-04x.pdf **Pins:** - 1 [pin 1] - 2 [pin 2] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/opium/rca-breakout~l4](https://www.flux.ai/opium/rca-breakout~l4).* --- *Generated from [https://www.flux.ai/opium/rca-breakout~l4](https://www.flux.ai/opium/rca-breakout~l4)*