# Micro HAT RPI template ## Description This Micro HAT RPI template you can use in your project for fast developing #template #project #RPI ## Project Details - **Owner:** ogntech - **Created:** 9/8/2025 - **Last Updated:** 9/8/2025 - **Visibility:** Public ## Key Components ### J2 — [Pin Socket 02x20 2.54mm](https://www.flux.ai/vasyl/pin-socket-02x20-254mm~nhe.md) - Part Type: Connector **Pins:** - Pin_1 - Pin_10 - Pin_11 - Pin_12 - Pin_13 - Pin_14 - Pin_15 - Pin_16 - Pin_17 - Pin_18 - Pin_19 - Pin_2 - Pin_20 - Pin_21 - Pin_22 - Pin_23 - Pin_24 - Pin_25 - Pin_26 - Pin_27 - Pin_28 - Pin_29 - Pin_3 - Pin_30 - Pin_31 - Pin_32 - Pin_33 - Pin_34 - Pin_35 - Pin_36 - Pin_37 - Pin_38 - Pin_39 - Pin_4 - Pin_40 - Pin_5 - Pin_6 - Pin_7 - Pin_8 - Pin_9 ### U1 — [INMP441 MEMS](https://www.flux.ai/adrian95/inmp441-mems~b4r.md) - Datasheet URL: https://invensense.tdk.com/wp-content/uploads/2015/02/INMP441.pdf - License: https://creativecommons.org/licenses/by/4.0/ - Manufacturer Part Number: INMP441 - Manufacturer Name: InvenSense - Part Type: Module **Pins:** - GND [pin 6] - L/R [pin 3] - SCK [pin 1] - SD [pin 4] - VCC [pin 5] - WS [pin 2] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/ogntech/micro-hat-rpi-template~gl](https://www.flux.ai/ogntech/micro-hat-rpi-template~gl).* --- *Generated from [https://www.flux.ai/ogntech/micro-hat-rpi-template~gl](https://www.flux.ai/ogntech/micro-hat-rpi-template~gl)*