ESP32-S3 PLC Architecture Discussion
Worked for 15 mins 44 sec
Completed the final schematic-gate pass and updated Schematic Review Before Layout. D29 is verified, L2 is now a confirmed shielded Sumida inductor, and U8/U9 FAULT is routed to ESP32 GPIO15 with a 10kΩ pull-up; ERC remains clean.
Open items:
- Layout is still not approved: HR911105A symbol-footprint mapping remains Must Fix because the Flux symbol/footprint readout is ambiguous versus the datasheet.
Suggested next steps:
- Replace HR911105A with a clearly numbered MagJack part/footprint, or manually verify its symbol-footprint mapping.
- After that, update the approval table to “Pass” and proceed to PCB placement.
Thought for 8 sec
In Flux, use the Export options from the project UI:
- Open your project.
- Click Export / download from the top toolbar or project menu.
- Choose:
- PDF for schematic/documentation output.
- Altium if available in your export list; otherwise export standard manufacturing/interchange formats such as Gerber, ODB++, IPC-2581, BOM, and Pick-and-Place.
If you don’t see an Altium export option, Flux may not support direct Altium project export for this project. For help from Flux support, use: https://docs.flux.ai/Introduction/getting-support.
Export and verify files
Export schematic PDF
Export BOM files
Generate manufacturing files
Create export checklist
Thought for 3 sec
