Coffee Machine Control Board Design
Route the PCB with explicit AC-load trace widths and AC/DC keepout rules.
Re-run DRC after routing and fix any clearance/overlap issues.
Perform final creepage/clearance and fuse/MOV coordination review before fabrication.
Thought for 5 sec
I’ll set routing constraints for the 2A AC load paths and AC/DC separation, run routing, then re-check DRC and document the remaining safety review items.
Thought for 10 sec
I’m blocked because your account has no available ACUs, so I can’t continue routing or running checks right now.
Accomplished this session:
- Acknowledged the routing/safety task.
- Created the routing/check/review task list.
Still to do once ACUs are available:
- Apply AC-load trace width and AC/DC keepout rules.
- Route the PCB.
- Re-run DRC and fix clearance/overlap issues.
- Document final creepage/clearance and fuse/MOV coordination review before fabrication.
Check ACU options
Save requirements note
List manual rules
Find rule settings
