# MyoEsp32 ## Description esp32 to myoware v1 board adapter to use the myoware with ble serial connection ## Project Details - **Owner:** mr-cat - **Created:** 5/23/2025 - **Last Updated:** 7/27/2025 - **Visibility:** Public ## Key Components ### EMG — [Pin Socket 01x03 2.54mm Vertical](https://www.flux.ai/adrian95/pin-socket-01x03-254mm-vertical.md) - License: https://creativecommons.org/licenses/by/4.0/ - Part Type: Connector **Pins:** - Pin_1 [pin 1] - Pin_2 [pin 2] - Pin_3 [pin 3] ### SW — [Pin Socket 01x03 2.54mm Vertical](https://www.flux.ai/adrian95/pin-socket-01x03-254mm-vertical.md) - License: https://creativecommons.org/licenses/by/4.0/ - Part Type: Connector **Pins:** - Pin_1 [pin 1] - Pin_2 [pin 2] - Pin_3 [pin 3] ### XIAO-ESP32 — [Seeed Studio XIAO ESP32C3](https://www.flux.ai/seeedstudio/seeed-studio-xiao-esp32c3.md) - Manufacturer Name: Seeed Studio - Part Type: Microcontroller - Purchase Url: https://www.seeedstudio.com/Seeed-XIAO-ESP32C3-p-5431.html - Datasheet URL: https://files.seeedstudio.com/wiki/XIAO_WiFi/Resources/esp32-c3_datasheet.pdf - Manufacturer Part Number: 113991054 **Pins:** - 3V3 [pin 12] - 5V [pin 14] - D10_MOSI_D10 [pin 11] - D7_RX_GPIO20 [pin 8] - D8_SCK_GPIO8 [pin 9] - D9_MISO_GPIO9 [pin 10] - GND [pin 13] - GPIO2_A0_D0 [pin 1] - GPIO21_TX_D6 [pin 7] - GPIO3_A1_D1 [pin 2] - GPIO4_A2_D2 [pin 3] - GPIO5_A3_D3 [pin 4] - GPIO6_SDA_D4 [pin 5] - GPIO7_SCL_D5 [pin 6] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/mr-cat/myoesp32](https://www.flux.ai/mr-cat/myoesp32).* --- *Generated from [https://www.flux.ai/mr-cat/myoesp32](https://www.flux.ai/mr-cat/myoesp32)*