ESP32 Sensor Schematic

Thought for 8 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget

Rename project, create specification, and record initial requirements/power budget

Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection

Add main components and supporting passives to the schematic

Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators

Create firmware/regulatory/bring-up project files

Run schematic/design checks and fix actionable issues

Thought for 8 sec
Reading project docs.
mostafa4466

mostafa4466

i will use esp32-s31 with ch340c create schematic

flux

No schematic changes have been made because this session has no available ACUs, so AI project editing is unavailable.
Remaining work:
  • Confirm whether “ESP32-S31” means ESP32-S3-WROOM-1 and specify antenna variant.
  • Create USB-C 5 V input with CC resistors and reverse-polarity, OVP, UVLO, and OCP protection.
  • Add 3.3 V regulation, ESP32-S3 support circuitry, CH340C USB-to-UART, auto-program/reset circuit, and digital temperature/RH sensor.
  • Verify boot straps, USB/UART connections, decoupling, power budget, and antenna keepout.
Compare antenna variants
Use PCB antenna
Use external antenna
Remove sensor requirement
Sign up to send
No schematic yet

Talk to Flux to get started.