# [Example] Arduino MKR Shield Template cfe7 ## Description Template for creating an Arduino MKR shield (https://www.arduino.cc/en/hardware#mkr-family) #Arduino #template #project #arduinomkr #zero ## Project Details - **Owner:** mohamedbenhasan - **Created:** 3/25/2024 - **Last Updated:** 3/25/2024 - **Visibility:** Public ## Key Components ### U1 — [ARDUINO MKR ZERO](https://www.flux.ai/vasyl/arduino-mkr-zero.md) - Datasheet URL: https://www.snapeda.com/parts/Arduino%20MKR%20ZERO/Arduino/datasheet/ - Manufacturer Part Number: ARDUINO MKR ZERO - Manufacturer Name: Arduino - Part Type: Board **Pins:** - 0 [pin J4_9] - 1 [pin J4_10] - 10_MISO [pin J5_5] - 11_SDA [pin J5_6] - 12_SCL [pin J5_7] - 13_RX [pin J5_8] - 14_TX [pin J5_9] - 2 [pin J4_11] - 3 [pin J4_12] - 3V3 [pin J5_12] - 4 [pin J4_13] - 5 [pin J4_14] - 5V [pin J5_14] - 6 [pin J5_1] - 7 [pin J5_2] - 8_MOSI [pin J5_3] - 9_SCK [pin J5_4] - A1 [pin J4_3] - A2 [pin J4_4] - A3 [pin J4_5] - A4 [pin J4_6] - A5 [pin J4_7] - A6 [pin J4_8] - AREF [pin J4_1] - DAC0/A0 [pin J4_2] - GND [pin J5_11] - RESET [pin J5_10] - VIN [pin J5_13] ### U2 — [ESP32-DEVKIT-V1](https://www.flux.ai/vasyl/esp32-devkit-v1.md) - Manufacturer Part Number: ESP32-DEVKIT-V1 - Datasheet URL: https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf - Part Type: Module - Manufacturer Name: Espressif Systems **Pins:** - 3V3 [pin 1] - D12 [pin 27] - D13 [pin 28] - D14 [pin 26] - D15 [pin 3] - D18 [pin 9] - D19 [pin 10] - D2 [pin 4] - D21 [pin 11] - D22 [pin 14] - D23 [pin 15] - D25 [pin 23] - D26 [pin 24] - D27 [pin 25] - D32 [pin 21] - D33 [pin 22] - D34 [pin 19] - D35 [pin 20] - D4 [pin 5] - D5 [pin 8] - EN [pin 16] - GND [pin 2] - GND__1 [pin 29] - RX0 [pin 12] - RX2 [pin 6] - TX0 [pin 13] - TX2 [pin 7] - VIN [pin 30] - VN [pin 18] - VP [pin 17] ### U3 — [SN74LS08D](https://www.flux.ai/jecstronic/sn74ls08d.md) - Manufacturer Part Number: SN74LS08D - License: https://creativecommons.org/licenses/by/4.0/ - Datasheet URL: https://www.ti.com/lit/ds/symlink/sn74ls08.pdf - Manufacturer Name: Texas Instruments - Part Type: Operational Amplifier (OP-AMP) **Pins:** - 1A [pin 1] - 1B [pin 2] - 1Y [pin 3] - 2A [pin 4] - 2B [pin 5] - 2Y [pin 6] - 3A [pin 9] - 3B [pin 10] - 3Y [pin 8] - 4A [pin 12] - 4B [pin 13] - 4Y [pin 11] - GND [pin 7] - VCC [pin 14] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/mohamedbenhasan/example-arduino-mkr-shield-template-cfe7](https://www.flux.ai/mohamedbenhasan/example-arduino-mkr-shield-template-cfe7).* --- *Generated from [https://www.flux.ai/mohamedbenhasan/example-arduino-mkr-shield-template-cfe7](https://www.flux.ai/mohamedbenhasan/example-arduino-mkr-shield-template-cfe7)*