WiFi & Bluetooth Sensor Node

Created a project doc

Project Specification — USB-C WiFi BLE TH Sensor

View Document
Status: Draft schematic in progress. A consumer USB-C powered temperature and relative humidity sensor node with Wi-Fi and Bluetooth Low Ene...

flux

Architecture review agrees with a USB-C sink plus real VBUS protection and a buck regulator; I’m selecting a low-power certified Wi‑Fi/BLE module rather than a hot LDO-based ESP32-style power tree.
Worked for 1 min 24 sec
Thought for 18 sec — Choosing components for low-power MCU
Found 3 results for Find Flux library USB input eFuse or protection switch IC for 5 V USB-C sink with adjustable/current limit around 0.75 to 1 A, overvoltage protection threshold above normal USB 5.25 V and below 9 V, undervoltage lockout, reverse current blocking, soft-start/inrush control, active SMD part. Prefer TI TPS2595 TPS2596 TPS2594 AP2265 AP22802 style eFuse..
Found 10 results for TPS2595.
Found 10 results for TPS2596.
Found 2 results for AP22652.
Found 4 results for NCP361.
Thought for 19 sec
Thought for 16 sec
Read SIWG917Y111MGABAR, SHT41-AD1B-R2, USB4105-GF-A, TPS259621DDAR, MP28301GG-Z, USBLC6-2SC6, ESD5341N datasheets.
Thought for 3 mins 19 sec — Assessing developer requirements
Thought for 10 sec — Searching for components
Found 5 results for LED 0603 green.
Found 1 results for tactile switch 4 pin SMD.
Found 1 results for SWD 10 pin 1.27mm header.
Found 3 results for DFE201612P-2R2M.
Thought for 18 sec
Read SIWG917Y111MGABAR siwg917y-datasheet.pdf.
Thought for 35 sec
Thought for a moment

Demo Complete

The guided demo is finished. You watched Flux replay a real design session in this read-only project. Sign up to build your own project.

Sign up to send
No schematic yet

Talk to Flux to get started.

No layout yet

When components get added to the schematic, they'll show up here.