# Arduino Nano Barebones - SMD No Header (Component) ## Description Important Note: You must connect your own SPI/ICSP programming header if you want to burn the Arduino bootloader to the MCU. In this version, you must also provide your own UART interface. SMD Manufacturing: Need a hotplate and solderpaste Good to haves: - Oscillator Decoupling Caps Expose UART via connector Programming Button Onboard LED Reset Button You don't have to populate everything! Only these are mandatory: Reset Button Find the reference schematic here: https://www.arduino.cc/en/uploads/Main/ArduinoNano30Schematic.pdf ## Component Details - **Owner:** markwuflux - **Created:** 8/11/2023 - **Last Updated:** 10/27/2023 - **Visibility:** Public - **Used in:** 67 projects - **Forks:** 1 --- *Generated from [https://www.flux.ai/markwuflux/arduino-nano-barebones-smd-no-header](https://www.flux.ai/markwuflux/arduino-nano-barebones-smd-no-header)*