# 8x8 Display with IMU V2 for Video ## Description Changelog/TODO: -Breakout the SPI Bus in a 2.54mm header in a snap off manner -add an IMU -Reorder the rows of the LEDs -Create an external USB-C UART programmer to provide programming and power Tutorials: https://circuitdigest.com/microcontroller-projects/interfacing-max7219-led-dot-matrix-display-with-arduino ## Project Details - **Owner:** markwuflux - **Created:** 9/12/2023 - **Last Updated:** 9/13/2023 - **Visibility:** Public - **Forks:** 1 ## Key Components ### J1 — M50-3500542 - Datasheet URL: https://www.mouser.com/datasheet/2/181/M50_350-1115491.pdf - Manufacturer Name: HARWIN - Manufacturer Part Number: M50-3500542 **Pins:** - 1 [pin 1] - 10 [pin 10] - 2 [pin 2] - 3 [pin 3] - 4 [pin 4] - 5 [pin 5] - 6 [pin 6] - 7 [pin 7] - 8 [pin 8] - 9 [pin 9] ### U1 — [MAX7219EWG+](https://www.flux.ai/jharwinbarrozo/max7219ewgplus~kjc.md) - Datasheet URL: https://datasheets.maximintegrated.com/en/ds/MAX7219-MAX7221.pdf - Manufacturer Name: Maxim Integrated - Manufacturer Part Number: MAX7219EWG+ - Part Type: Integrated Circuit **Pins:** - 1 / DIN - 10 / DIG_5 - 11 / DIG_1 - 12 / LOAD - 13 / CLK - 14 / SEG_A - 15 / SEG_F - 16 / SEG_B - 17 / SEG_G - 18 / ISET - 19 / V+ - 2 / DIG_0 - 20 / SEG_C - 21 / SEG_E - 22 / SEG_DP - 23 / SEG_D - 24 / DOUT - 3 / DIG_4 - 4 / GND - 5 / DIG_6 - 6 / DIG_2 - 7 / DIG_3 - 8 / DIG_7 - 9 / GND__1 *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/markwuflux/8x8-display-with-imu-v2-for-video~01](https://www.flux.ai/markwuflux/8x8-display-with-imu-v2-for-video~01).* --- *Generated from [https://www.flux.ai/markwuflux/8x8-display-with-imu-v2-for-video~01](https://www.flux.ai/markwuflux/8x8-display-with-imu-v2-for-video~01)*