Line Robot Design

Worked for 34 sec

Referenced guidance.

Thought for 15 sec — Searching for library schema

Created 6 tasks.

1/6 Rename project, create specification, and record initial requirements/power budget

Rename project, create specification, and record initial requirements/power budget

Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection

Add main components and supporting passives to the schematic

Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators

Create firmware/regulatory/bring-up project files

Run schematic/design checks and fix actionable issues

Thought for 8 sec

Reading project docs.

Renamed USB-C WiFi BLE TH Sensor.

Updated project description.

Set Domain, Connectivity, Connectivity and 2 more.

Thought for a moment

Creating documentation and estimates

luchifer120

i need this for a competition of liner robot

pasted-text-1788054398991.txt

Thought for 5 sec

flux

No project changes were made; the project remains empty with 0 components and 0 nets. I also could not open pasted-text-1788054398991.txt, so I could not reconcile its competition rules with the existing USB-C Wi‑Fi/BLE environmental-sensor requirements.

The design direction may need to change substantially if this is for a line-following robot competition rather than a stationary temperature/humidity node. The attachment must be reviewed first to determine required sensors, motors, battery/power limits, dimensions, wireless restrictions, and safety rules.

Execution stopped because your ACUs ran out.

Review competition rules

Rework for line robot

Check robot inputs

No schematic yet

Talk to Flux to get started.