LED Blinker Circuit Design
Worked for 24 sec
Done — here’s the updated PCB layout PDF:
Note: the PCB layout still has unrouted airwires, so this PDF reflects the current layout state, not a finished routed PCB.
Route the remaining airwires and then regenerate the PCB layout PDF.
Thought for 8 sec
I’ll route the remaining PCB airwires, verify the routing, then regenerate the PCB layout PDF.
Worked for 6 mins 58 sec
Routed the remaining airwires successfully — 58 routing nodes were added, and the follow-up DRC check shows no open airwire, overlap, dangling trace, missing-footprint, or invalid-layer issues.
Generate a STEP model for mechanical review.
Thought for 8 sec
I’ll generate the STEP model from the current routed PCB layout for mechanical review.
Worked for 34 sec
Done — the routed PCB passed the key pre-export checks, and I generated the STEP model for mechanical review:
3D Model (STEP)
Failed to load 3D model
Generate Gerbers
Export BOM CSV
Final DRC check
Assembly drawing
