USB-C Sensor Node PCB


Make me a temperature and humidity sensor node with Wifi and Bluetooth, powered by USB-C (5V) for consumer use.
It should be a low-power environmental node with a digital T/RH sensor, ultra-low-power MCU with Wi-Fi + Bluetooth (dual-radio) — 2.4 GHz 802.11 b/g/n plus BLE 5.x powered by USB-C (5 V) — USB-C receptacle 5 V default; include reverse/OVP/UVLO/OCP protection and plan for 0.5–3 A sources.
I’ll build the schematic for a USB-C powered Wi‑Fi/BLE temperature/humidity sensor node: set requirements, choose parts, add/wire power protection, MCU, sensor, and then run checks.
make a pcb with 5mm led connectd to connector directly . that it 2 component 30mmx30mm pcb size
No project changes were made. The requested design remains: a 30 mm × 30 mm PCB with exactly two components—a connector wired directly to a 5 mm through-hole LED—but execution is blocked because no ACUs are currently available.
Add connector and LED
Use 2.54 mm header
Use screw terminal
Set board and placement

Waiting for input

No schematic yet

Talk to Flux to get started.