Project Started


I’ll make the PCB placeholder a continuous annulus—keeping its center opening and mounting holes—and measure how far it must rise to clear J1. I’ll check the raised position against the cap, tray, and battery, and flag any mounting changes it requires rather than hiding collisions.
Updated the green placeholder to a continuous 55/30 mm annulus, retaining its mounting holes, and raised its underside 8 mm to z=11 mm, providing 0.5 mm nominal clearance above J1.
It is provisional, not fitted: the raised ring intersects the battery and no longer engages the cap supports or spring contacts. Everything else is unchanged; measurements and renders are in Continuous Ring Clearance Check.
"Continuous Ring PCB Clearance Update" completed.
The ring is now continuous and raised 8 mm, giving 0.5 mm clearance above J1, but it intersects the battery and is not a fitted assembly.
  • Preserved: 55 mm OD, 30 mm center opening, 1 mm thickness, and three mounting holes.
  • Existing support pins/hooks no longer engage; the spring contacts now have 8 mm gaps.
  • Raising it further cannot solve this inside the current cap: the battery and roof limits conflict by 0.75 mm, even before adding clearance.
Only the ring placeholder changed; everything else remains untouched. I recommend keeping this position provisional while checking a revised internal stack. Which direction would you like?
1. Check a revised internal stack
2. Assess a taller cap

Waiting for input


DigiKey Sourcing Report
Audit date: 2026-09-18
Final BOM sourcing table

Table


DesignatorsQtyValue / functionManufacturerMPNDigiKey P/NDigiKey stock statusChange / decision
R1, R224.7 kΩ, 0603YageoRC0603FR-074K7L311-4.70KHRCT-NDVerified stocked in sourcing auditMPN metadata assigned; no footprint/value change
R3, R42100 kΩ, 0603YageoRC0603FR-07100KL311-100KHRCT-NDVerified stocked in sourcing auditMPN metadata assigned; no footprint/value change
R5, R6, R73100 Ω gate resistor, 0603StackpoleRMCF0603FT100RRMCF0603FT100RCT-NDVerified stocked; product stock about 1.66M, cut tape availableCompleted in final pass; corrected DigiKey product URL and selected cut-tape SKU
R8, R9, R10310 kΩ gate pulldown, 0603Vishay DaleCRCW060310K0FKEA541-10.0KHCT-NDVerified stocked in sourcing auditMPN metadata assigned; no footprint/value change
C1–C66100 nF, 0603Kyocera AVX06035C104K4T2A478-KAM15AR71H104KTCT-NDVerified stocked in sourcing auditMPN metadata assigned; no footprint/value change
C7–C9310 µF, 0603Samsung Electro-MechanicsCL10A106KQ8NNNC1276-1038-1-NDVerified stocked in sourcing auditMPN metadata assigned; no footprint/value change
L112.2 µH buck inductor, 0603Taiyo YudenMBKK1608H2R2M587-4737-1-NDVerified stocked: approximately 3,000 units in the final live BOM checkAssigned in final pass. 750 mA rated, 520 mA saturation, shielded. Meets TPS62740 300 mA requirement without footprint change
Q1–Q33N-channel MOSFETonsemiBSS138Existing library MPNDigiKey-listed; existing part was not substitutedNo change
D11Schottky isolation diodeFMSDSK34No verified DigiKey SKUNot verified at DigiKeyExisting specified part retained; no substitution made
U11BLE moduleRaytacMDBT50Q-1MV2Existing library MPNDigiKey availability not requalified in this passive-sourcing passNo change or substitution
U21Vibration sensorSTMicroelectronicsIIS3DWB10ISTRExisting exact MPNDigiKey-listed; exact part retainedNo change or substitution
U31Temperature sensorTexas InstrumentsTMP117AIDRVRExisting library MPNDigiKey-listed; exact part retainedNo change or substitution
U41Buck regulatorTexas InstrumentsTPS62740DSST296-37134-2-NDVerified stocked: about 7,500 units in BOM dataNo change or substitution
P1–P77Dock contactsKeystone Electronics495236-4952-NDVerified stocked: about 160,839 units in BOM dataNo change or substitution
J114-position SWD headerMolex0470531000Existing library MPNDigiKey-listed; existing part retainedNo change or substitution
L1 decision
The preferred newer Taiyo Yuden LSCNB1608HKT2R2MD / older MCHK1608T2R2MKN options have higher current capability but were at zero DigiKey stock during the final audit. They were therefore not assigned.
L1 was assigned MBKK1608H2R2M because it is currently stocked, preserves the existing 0603 footprint, is 2.2 µH, shielded, rated for 750 mA, and has 520 mA saturation current. This is above the TPS62740's 300 mA maximum output current. No electrical value, package, connectivity, or placement was changed.
Exceptions
  • No substitutions were made to any existing non-passive MPN.
  • D1 remains DSK34 because a DigiKey-stocked exact listing was not verified and the user did not authorize substitution.
  • Distributor stock is time-sensitive and should be refreshed immediately before ordering.
  • Final BOM sourcing table

  • L1 decision

  • Exceptions