# Guitar Pedal Template okLL ## Description Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply, a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. size is a good default size for a 125B enclosure. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. Meant to be used with the 3PDT Breakout Board on my profile. #template ## Project Details - **Owner:** krux12 - **Created:** 9/19/2024 - **Last Updated:** 9/19/2024 - **Visibility:** Public ## Key Components ### J1 — [Pin Header 01x02 2.54mm Vertical](https://www.flux.ai/jharwinbarrozo/generic-pin-header-01x02-2p54mm-vertical~4uy.md) - Part Type: Connector - License: https://creativecommons.org/licenses/by/4.0/ **Pins:** - P1 [pin 1] - P2 [pin 2] ### J2 — [Pin Header 01x02 2.54mm Vertical](https://www.flux.ai/jharwinbarrozo/generic-pin-header-01x02-2p54mm-vertical~4uy.md) - Part Type: Connector - License: https://creativecommons.org/licenses/by/4.0/ **Pins:** - P1 [pin 1] - P2 [pin 2] ### J3 — [Pin Header 01x02 2.54mm Vertical](https://www.flux.ai/jharwinbarrozo/generic-pin-header-01x02-2p54mm-vertical~4uy.md) - Part Type: Connector - License: https://creativecommons.org/licenses/by/4.0/ **Pins:** - P1 [pin 1] - P2 [pin 2] ### V1 — [Waveform Generator](https://www.flux.ai/jharwinbarrozo/waveform-generator~ggu.md) - DC Offset: 0V - Part Type: Power Source - Frequency: 800Hz - Duty Cycle: 50% - Phase Offset: 0° - Peak Voltage: 5V **Pins:** - P1 [pin 1] - P2 [pin 2] ### VR1 — [Pin Socket 01x03 2.54mm Vertical](https://www.flux.ai/adrian95/pin-socket-01x03-254mm-vertical~tj7.md) - Part Type: Connector - License: https://creativecommons.org/licenses/by/4.0/ **Pins:** - Pin_1 [pin 1] - Pin_2 [pin 2] - Pin_3 [pin 3] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/krux12/guitar-pedal-template-okll~8p](https://www.flux.ai/krux12/guitar-pedal-template-okll~8p).* --- *Generated from [https://www.flux.ai/krux12/guitar-pedal-template-okll~8p](https://www.flux.ai/krux12/guitar-pedal-template-okll~8p)*