# Guitar Pedal Template ## Description Guitar pedal starter template based on project by Mark Wu. Includes schematic and PCB layout for basic DIY pedal hardware. This includes two 1/4" jacks (one for input and one for output), a 9V power supply (including LED), a 3PDT true bypass wiring setup, and an example potentiometer that can be copy/pasted throughout the circuit. The headers are meant to be unpopulated so that wires can be soldered to the pads. PCB design rules imported from the JLCPCB 2-layer stackup template. #template ## Project Details - **Owner:** koppernico - **Created:** 9/7/2024 - **Last Updated:** 9/7/2024 - **Visibility:** Public ## Key Components ### D1 — [LED](https://www.flux.ai/jharwinbarrozo/led-tht.md) - Series Resistance: 0.42Ω - Emission Coefficient: 3.73 - Forward Voltage: 1.70 - Breakdown Voltage: 0V - Saturation Current: 93.2e-12A **Pins:** - A [pin 2] - K [pin 1] ### J1 — [Pin Header 01x02 2.54mm Vertical](https://www.flux.ai/jharwinbarrozo/pin-header-01x02-254mm-vertical.md) - License: https://creativecommons.org/licenses/by/4.0/ - Part Type: Connector **Pins:** - P1 [pin 1] - P2 [pin 2] ### J2 — [Pin Header 01x02 2.54mm Vertical](https://www.flux.ai/jharwinbarrozo/pin-header-01x02-254mm-vertical.md) - License: https://creativecommons.org/licenses/by/4.0/ - Part Type: Connector **Pins:** - P1 [pin 1] - P2 [pin 2] ### J3 — [Pin Header 01x02 2.54mm Vertical](https://www.flux.ai/jharwinbarrozo/pin-header-01x02-254mm-vertical.md) - Part Type: Connector - License: https://creativecommons.org/licenses/by/4.0/ **Pins:** - P1 [pin 1] - P2 [pin 2] ### J4 — [Connector 01x06](https://www.flux.ai/jharwinbarrozo/connector-01x06.md) - Part Type: Connector **Pins:** - Pin_1 [pin 1] - Pin_1 [pin 1] - Pin_2 [pin 2] - Pin_3 [pin 3] - Pin_4 [pin 4] - Pin_5 [pin 5] - Pin_6 [pin 6] ### LED1 — [WS2812B-B](https://www.flux.ai/vasyl/ws2812b-b.md) - Datasheet URL: https://datasheet.lcsc.com/lcsc/2006151006_Worldsemi-WS2812B-B_C114586.pdf - Manufacturer Part Number: WS2812B-B - Part Type: LED - Manufacturer Name: Worldsemi **Pins:** - DIN [pin 4] - DOUT [pin 2] - VDD [pin 1] - VSS [pin 3] ### VR1 — [Pin Socket 01x03 2.54mm Vertical](https://www.flux.ai/adrian95/pin-socket-01x03-254mm-vertical.md) - License: https://creativecommons.org/licenses/by/4.0/ - Part Type: Connector **Pins:** - Pin_1 [pin 1] - Pin_2 [pin 2] - Pin_3 [pin 3] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/koppernico/guitar-pedal-template](https://www.flux.ai/koppernico/guitar-pedal-template).* --- *Generated from [https://www.flux.ai/koppernico/guitar-pedal-template](https://www.flux.ai/koppernico/guitar-pedal-template)*