# TinyIMU 4.0.3 ## Description IMU board used for finger-tracking in haptic gloves Difference from TinyIMU 4.0.2 is that there is an attempt to optimize board size ## Project Details - **Owner:** klam23 - **Created:** 2/9/2024 - **Last Updated:** 2/9/2024 - **Visibility:** Public ## Key Components ### FPC-1 — [THD0510-10CL-GF](https://www.flux.ai/jlamflux/thd0510-10cl-gf~r8.md) - Manufacturer Part Number: THD0510-10CL-GF **Pins:** - 1 [pin 1] - 10 [pin 10] - 2 [pin 2] - 3 [pin 3] - 4 [pin 4] - 5 [pin 5] - 6 [pin 6] - 7 [pin 7] - 8 [pin 8] - 9 [pin 9] - MP1 [pin MP1] - MP2 [pin MP2] ### FPC-2 — [THD0510-10CL-GF](https://www.flux.ai/jlamflux/thd0510-10cl-gf~r8.md) - Manufacturer Part Number: THD0510-10CL-GF **Pins:** - 1 [pin 1] - 10 [pin 10] - 2 [pin 2] - 3 [pin 3] - 4 [pin 4] - 5 [pin 5] - 6 [pin 6] - 7 [pin 7] - 8 [pin 8] - 9 [pin 9] - MP1 [pin MP1] - MP2 [pin MP2] ### U2 — LIS3DH 2.0 - Manufacturer Part Number: LIS3DH - Datasheet URL: http://www.st.com/content/ccc/resource/technical/document/datasheet/3c/ae/50/85/d6/b1/46/fe/CD00274221.pdf/files/CD00274221.pdf/jcr:content/translations/en.CD00274221.pdf - Part Type: Integrated Circuit - Manufacturer Name: STMicroelectronics **Pins:** - ADC1 [pin 16] - ADC2 [pin 15] - ADC3 [pin 13] - CS [pin 8] - GND [pin 5] - GND [pin 12] - GND [pin 10] - INT1 [pin 11] - INT2 [pin 9] - NC [pin 2] - NC [pin 3] - SCL/SPC [pin 4] - SDA/SDI/SDO [pin 6] - SDO/SA0 [pin 7] - VDD [pin 14] - VDD_IO [pin 1] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/klam23/tinyimu-4p0p3~wc](https://www.flux.ai/klam23/tinyimu-4p0p3~wc).* --- *Generated from [https://www.flux.ai/klam23/tinyimu-4p0p3~wc](https://www.flux.ai/klam23/tinyimu-4p0p3~wc)*