Temperature and Humidity Sensor Design

Make me a temperature and humidity sensor node with Wifi and Bluetooth, powered by USB-C (5V) for consumer use.

It should be a low-power environmental node with a digital T/RH sensor, ultra-low-power MCU with Wi-Fi + Bluetooth (dual-radio) — 2.4 GHz 802.11 b/g/n plus BLE 5.x powered by USB-C (5 V) — USB-C receptacle 5 V default; include reverse/OVP/UVLO/OCP protection and plan for 0.5–3 A sources.

Thought for 2 sec

flux

I can’t execute design changes right now because this account has no available ACUs, so AI project editing is unavailable.

Nothing has been modified in the project yet — it’s still an empty draft with 0 components and 0 nets. Remaining work once ACUs are available: create the project spec, select a Wi‑Fi/BLE MCU module and digital temperature/humidity sensor, design the USB‑C 5 V input with CC resistors plus reverse/OVP/UVLO/OCP protection for 0.5–3 A sources, add regulation and decoupling, wire the schematic, then produce bring-up/regulatory/firmware notes for consumer use.

Create requirements note

Recommend core parts

Draft power architecture

List schematic blocks

No schematic yet

Talk to Flux to get started.

No layout yet

When components get added to the schematic, they'll show up here.