Temperature and Humidity Sensor Design

Make me a temperature and humidity sensor node with Wifi and Bluetooth, powered by USB-C (5V) for consumer use.

It should be a low-power environmental node with a digital T/RH sensor, ultra-low-power MCU with Wi-Fi + Bluetooth (dual-radio) — 2.4 GHz 802.11 b/g/n plus BLE 5.x powered by USB-C (5 V) — USB-C receptacle 5 V default; include reverse/OVP/UVLO/OCP protection and plan for 0.5–3 A sources.

Thought for 2 sec

flux

I can’t execute design changes right now because this account has no available ACUs, so AI project editing is unavailable.

Nothing has been modified in the project yet — it’s still an empty draft with 0 components and 0 nets. Remaining work once ACUs are available: create the project spec, select a Wi‑Fi/BLE MCU module and digital temperature/humidity sensor, design the USB‑C 5 V input with CC resistors plus reverse/OVP/UVLO/OCP protection for 0.5–3 A sources, add regulation and decoupling, wire the schematic, then produce bring-up/regulatory/firmware notes for consumer use.

Create requirements note

Recommend core parts

Draft power architecture

List schematic blocks

No schematic yet

Talk to Flux to get started.