Make me a temperature and humidity sensor node wit

Make me a temperature and humidity sensor node with Wifi and Bluetooth, powered by USB-C (5V) for consumer use.

It should be a low-power environmental node with a digital T/RH sensor, ultra-low-power MCU with Wi-Fi + Bluetooth (dual-radio) — 2.4 GHz 802.11 b/g/n plus BLE 5.x powered by USB-C (5 V) — USB-C receptacle 5 V default; include reverse/OVP/UVLO/OCP protection and plan for 0.5–3 A sources.

Thought for 6 sec

flux

I can’t execute design changes right now because this account has no available ACUs, so AI project mutation tools are unavailable.

Current project state:

New empty project: Conventional Amber Electronic Thumb
Components: 0
Nets: 0
No schematic, PCB, BOM, or documentation has been created yet.

What remains to be done once ACUs are available:

Create the project specification for a USB-C powered consumer Wi-Fi/BLE temperature-humidity sensor node.
Select the MCU/module, likely an ultra-low-power Wi-Fi + BLE 5.x module such as an ESP32-C6/ESP32-S3 class module depending on requirements.
Select a digital T/RH sensor, e.g. Sensirion SHT4x/SHTC3 class or equivalent.
Design USB-C 5 V input with default-current CC resistors and protection: reverse protection, OVP, UVLO, OCP/current limiting, ESD, and fuse/load switch sized for 0.5–3 A sources.
Add power regulation, I2C pull-ups, decoupling, programming/debug access, status LED, and required boot/reset circuitry.
Generate schematic, validate ERC, then proceed to PCB layout with antenna keepout, USB-C placement, and consumer-use safety/manufacturing checks.

No schematic yet

Talk to Flux to get started.