USB-C Sensor Node
Worked for 1 min 37 sec
Created a project doc
Project Specification — USB-C WiFi BLE TH Sensor
Status: Draft schematic in progress. A consumer USB-C powered temperature and relative humidity sensor node with Wi-Fi and Bluetooth Low Ene...
Architecture review agrees with a USB-C sink plus real VBUS protection and a buck regulator; I’m selecting a low-power certified Wi‑Fi/BLE module rather than a hot LDO-based ESP32-style power tree.
Worked for 2 mins 9 sec
Components are in: Silicon Labs SiWG917 Wi‑Fi/BLE module, SHT41 T/RH sensor
Thought for 8 sec
Thought for a moment
Assessing wire connections
I’m considering if I need to handle wire in batches of 10
Thought for 2 sec
No project changes were made. This session is blocked because no ACUs are currently available.
Current project remains the USB-C WiFi BLE TH Sensor; the new 30 kW induction-heater request still needs requirements definition and should be developed as a separate project. Key inputs required: mains supply/phase/voltage, target material and workpiece size, operating frequency, heating target and cycle time, coil geometry, cooling method, and applicable safety/certification region.
Brainstorm heater requirements
Draft requirements document
Identify power-stage inputs
Waiting for input
