# QuadCharger ## Description Use this template if you're planning to get your 1 to 2-layer board manufactured in JLCPCB. It has the via min/max and trace width constraints already baked as global rules. #project-template #template #manufacturer-design-rules ## Project Details - **Owner:** johan1227 - **Created:** 6/30/2024 - **Last Updated:** 6/30/2024 - **Visibility:** Public ## Key Components ### J3 — [DB126V-5.0-3P-GN](https://www.flux.ai/jharwinbarrozo/db126v-5p0-3p-gn~6j.md) - Manufacturer Name: DIBO - Part Type: Connector - License: https://creativecommons.org/licenses/by/4.0/ - Datasheet URL: https://datasheet.lcsc.com/lcsc/1912111437_DIBO-DB126V-5-0-3P-GN_C395850.pdf - Manufacturer Part Number: DB126V-5.0-3P-GN **Pins:** - PIN1 [pin 1] - PIN2 [pin 2] - PIN3 [pin 3] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/johan1227/quadcharger~ng](https://www.flux.ai/johan1227/quadcharger~ng).* --- *Generated from [https://www.flux.ai/johan1227/quadcharger~ng](https://www.flux.ai/johan1227/quadcharger~ng)*