Chat


How can I help you?
No schematic yet

Talk to Flux to get started.

Requested GPIO Wiring
Status
The user requested the wiring below. Recorded from the table pasted directly in chat; the linked attachment was not opened because no file-reading tool was available in this turn. No components, nets, or PCB edits have been made. Project context reports an empty project (0 components, 0 nets). Execution stopped because the account ran out of ACUs.
Requested assignments

Table


Peripheral signalESP32 GPIOUser notes
SD SCK18VSPI clock
SD MISO19VSPI data to ESP32
SD MOSI23VSPI data from ESP32
SD CS5Chip select
TFT SCLK14Separate display bus
TFT MOSI13Display data
TFT CS22Chip select
TFT DC21Data/command
TFT RST4Reset
TFT BLK16Backlight control, subject to module requirements
Play button27Button to GND, if using pull-up
Left encoder A/B25 / 26Quadrature inputs
Battery sense34Through voltage divider
Status LED2Check onboard LED polarity and availability
Next-session work
  • Read the linked attachment and compare it with this pasted table.
  • Establish the exact ESP32 board/module, TFT module, SD interface, battery chemistry and maximum voltage, and power source before choosing components and wiring power.
  • Verify pin availability and boot-strapping constraints against the selected ESP32 variant; do not assume this mapping applies to every ESP32 family or module.
  • Verify TFT backlight electrical requirements before connecting GPIO16; use a driver if required.
  • Size the battery divider for the selected battery voltage and ADC input limits.
  • Implement the requested mapping with suitable power, decoupling, button/encoder input configuration, and LED current limiting; then verify connectivity and electrical constraints.
  • Status

  • Requested assignments

  • Next-session work