USB-C Sensor Node
Worked for 50 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget
Thought for 8 sec
Reading project docs.
Renamed USB-C WiFi BLE TH Sensor.
Updated project description.
Set Domain, Connectivity, Connectivity and 2 more.
Thought for 1 min 40 sec — Creating documentation and estimates
2/6 Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection
Rename project, create specification, and record initial requirements/power budget
Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection
Add main components and supporting passives to the schematic
Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators
Create firmware/regulatory/bring-up project files
Run schematic/design checks and fix actionable issues
Thought for 38 sec
Search Select a low-power Wi-Fi plus Bluetooth LE 5.x MCU module for a USB-C powered consumer temperature/humidity sensor node. Need 2.4 GHz 802.11 b/g/n, BLE 5.x, native USB programming preferred, integrated antenna/certified module, 3.3 V operation, suitable Flux library part..
Search Select a digital temperature and relative humidity sensor IC for an indoor consumer environmental node. Need I2C interface, 3.3 V operation, low power, good accuracy, SMD package, available Flux library part, modern non-EOL part..
Search Select a USB-C receptacle for a 5 V sink-only consumer IoT sensor node. Need USB 2.0 data pins D+ D-, CC1 CC2 pins, SMD or hybrid mechanical shell, Flux library part with footprint..
Search Select a 5 V USB input protection IC or eFuse/load switch for consumer USB-C powered IoT node. Need overvoltage protection, undervoltage lockout, overcurrent/current limit around 0.5 to 3 A capable sources, reverse-current blocking if possible, output to 3.3 V regulator, SMD Flux library part..
Search Select a 5 V to 3.3 V regulator for ESP32-class Wi-Fi sensor node. Need low quiescent current, at least 600 mA transient capability, thermally suitable for USB 5 V to 3.3 V, SMD Flux library part. Buck or thermally capable LDO acceptable..
Search Select USB ESD protection for USB 2.0 D+ D- lines and 5 V VBUS on a USB-C powered consumer IoT node. Need low capacitance data line TVS array and VBUS TVS/protection parts available in Flux library..
Creating "Project Specification" project doc.
Create me a multi-cart that will work on my wonderswan and wonderswan color
Thought for 2 sec
No project changes were made; the current project is still an empty USB‑C Wi‑Fi/BLE temperature/humidity sensor design. Your new WonderSwan/WonderSwan Color multicart request remains unstarted because no ACUs are currently available; it will also need cartridge-interface specifications, storage capacity, bank-switching/FPGA architecture, voltage compatibility, and physical cartridge requirements defined before schematic and PCB work.
Research compatible architecture
List required specifications
Find cartridge documentation
No schematic yet
Talk to Flux to get started.
No layout yet
When components get added to the schematic, they'll show up here.