Verify active TSL9A12V18CX5 RFG only no children. Exact1.8V SOT25 ordering/pinmap verified dsq_0d600764d5016195a827 ds1-6; reference local.70x1mm pitch.95 span2.35 unitsmm verified dsq_16a8d2f4cc867910d57e ds1-6. Expected1Input Power In2Ground Ground3Enable Input4NC Not Connected5Output Power Out. Check exact identity manufacturer, pins types/map/count; distinct one-to-one nonoverlap pads actual numeric size/pitch/span pin1; package/body; intended assetless parametric SOT model centered over pads no asset not absent. Nominal not max envelope visual lead/seating fit gaps explicit. Repair confirmed defects only publish SAME part new version only if changed after fixes committed. No unchanged republish/instances/clones/courtyard. FINAL explicitly actual owner MPN manufacturer UID latest version full shortID URL numeric dimensions and all checks/gaps, not file link alone.
Owner: jharwinbarrozo. MPN: TSL9A12V18CX5 RFG. Part UID: 49f4e429-3173-4f2d-b734-e28fef878184. Project short ID: x15. URL: /jharwinbarrozo/tsl9a12v18cx5-rfg.
Confirmed manufacturer defect repaired from TSMC to Taiwan Semiconductor in commit 67ebe5d5; read back successfully. Datasheet names Taiwan Semiconductor.
Same part republished once because of this repair; latest version 07344763-ba9c-4cd5-a77a-deb26eca1ab6 (short 07344763), confirmed latest by version history. No instances, clones, children, courtyard or geometry edits.
Verified TSL9A12V18CX5 RFG, owner jharwinbarrozo, UID 49f4e429-3173-4f2d-b734-e28fef878184, project short ID x15; corrected manufacturer TSMC → Taiwan Semiconductor in commit 67ebe5d5 and published the same part as latest version 07344763-ba9c-4cd5-a77a-deb26eca1ab6 (short 07344763).
Exact 1.8 V SOT-25 identity passes; all five pin mappings/types pass (1 Input/Power In, 2 Ground/Ground, 3 Enable/Input, 4 NC/Not Connected, 5 Output/Power Out), with five distinct one-to-one nonoverlapping pads measuring local 0.70 × 1.00 mm, 0.95 mm pitch, 2.35 mm row-center span, 0.25 mm adjacent gap, pin 1 at (−1.175,+0.950) mm, and all four returned component checks successful.
The intended assetless parametric SOT model exists, centered with zero rotation and unit scale, nominal 1.60 × 2.90 × 1.175 mm rather than maximum-envelope geometry; visual lead fit, rendered pin-1 and seating remain unverified because the 2D render was blank and no 3D render was obtained—full evidence and gaps are recorded in project files: Part Verification.
Owner: jharwinbarrozo. MPN: TSL9A12V18CX5 RFG. Part UID: 49f4e429-3173-4f2d-b734-e28fef878184. Project short ID: x15. URL: /jharwinbarrozo/tsl9a12v18cx5-rfg.
Confirmed manufacturer defect repaired from TSMC to Taiwan Semiconductor in commit 67ebe5d5; read back successfully. Datasheet names Taiwan Semiconductor.
Same part republished once because of this repair; latest version 07344763-ba9c-4cd5-a77a-deb26eca1ab6 (short 07344763), confirmed latest by version history. No instances, clones, children, courtyard or geometry edits.
Exact ordering is 1.8 V, SOT-25.
Pin and pad verification
Five pins with unique numbers and one-to-one corresponding pad names; no extra or duplicate pad positions. Datasheet pin functions confirmed.
Table
Pin
Name
Electrical type
Pad center X,Y mm
1
Input
Power In
-1.175,+0.950
2
Ground
Ground
-1.175,0
3
Enable
Input
-1.175,-0.950
4
NC
Not Connected
+1.175,-0.950
5
Output
Power Out
+1.175,+0.950
Actual local rectangular pad size: 0.70 x 1.00 mm, rotated 270 degrees on left and 90 degrees on right; board-axis extents therefore 1.00 x 0.70 mm. Pitch 0.95 mm; row-center span 2.35 mm. Neighbor copper gap 0.25 mm; opposing pad inner gap 1.35 mm. Overall pad-field bounds X +/-1.675 mm, Y +/-1.300 mm, or 3.35 x 2.60 mm. Pads distinct and nonoverlapping numerically. Values match suggested reference lands, not an independently optimized IPC pattern.
Pin 1 at (-X,+Y). Silk SVG marker raw coordinate (-1.96354,-1.650) mm corresponds to (-X,+Y) after SVG Y inversion; numerical orientation consistent. Blank 2D render prevents visual confirmation.
Package and model
Package property 25-SOT, footprint/model package SOT-23-5, five leads. Intended built-in assetless parametric model exists under footprint; absence of an asset reference is intentional, not absence of a model. Footprint and model centered at (0,0,0), zero rotation, scale 1, Z-up, physical materials true. Computed nominal package size X,Y,Z = 1.60 x 2.90 x 1.175 mm. Datasheet body width 1.40–1.80 mm, body length 2.70–3.10 mm and overall height 0.90–1.45 mm; nominal values are within ranges, not maximum-envelope geometry.
Checks and explicit gaps
Component checks Incomplete Project Info, Missing Properties, Missing Terminals, Excluded Terminal all Success, zero errors/warnings. Requested overlapping-copper/invalid-pad reviews were not returned for this part project; nonoverlap assessed numerically instead. Symbol pin electrical types verified via own symbol pin table.
2D layout-image tool returned blank; no available 3D render was obtained. Visual model lead-to-pad contact, rendered pin-1 feature, lead dimensions, standoff/seating and full tolerance-envelope clearance therefore remain UNVERIFIED, not passed. Model node/centering/package parameters are verified from tree only. Description still conservatively states own-project verification pending; no unsupported geometry repair attempted.
Initial supplied evidence handles did not resolve in this active project. Fresh own-datasheet queries verified facts: dsq_29088064354b3817a721 and dsq_39c9b76a1fd7ef7f45cf.