# RFID PCB Antenna Board ## Description This is a compact, high-performance RFID antenna solution built on a printed circuit board configurations. It has miniature RF connector (also known as a U.FL or IPX connector) that allows easy connection to an external antenna. It’s especially useful when you want better signal performance or need to position the antenna away from the main board (e.g., in an enclosure or plastic housing). ## Project Details - **Owner:** jharwinbarrozo - **Created:** 4/2/2025 - **Last Updated:** 4/4/2025 - **Visibility:** Public ## Key Components ### ANT — [Inductor 4mm x 4mm (4012)](https://www.flux.ai/markwuflux/inductor-4mm-x-4mm-4012~em.md) - Part Type: Inductor **Pins:** - P1 [pin 1] - P2 [pin 1] ### RF1 — [RF-003](https://www.flux.ai/lcsc/rf-003~56wr.md) - LCSC Part Number: C3032922 - Package or Case Code: IPEX-SMD_4P-L1.7-W1.7-LS2.0-L - Manufacturer Part Number: RF-003 - Manufacturer Name: Yuandi(元迪) - Part Type: RF Connectors / Coaxial Connectors - JLCPCB Part Class: Extended Part **Pins:** - 1 [pin 1] - 2 [pin 2] - 3 [pin 3] - 4 [pin 4] *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/jharwinbarrozo/rfid-pcb-antenna-board~hnb](https://www.flux.ai/jharwinbarrozo/rfid-pcb-antenna-board~hnb).* --- *Generated from [https://www.flux.ai/jharwinbarrozo/rfid-pcb-antenna-board~hnb](https://www.flux.ai/jharwinbarrozo/rfid-pcb-antenna-board~hnb)*