MAX1983EUT+T Verification


Created a project doc

Part Verification

View Document

Part Verification Identity and publication
  • Scope: active part only; no children, instances, clones, or courtyard added.
  • Owner: jharwinbarrozo.
  • Exact MPN: MAX1983EUT+T; manufacturer property: Analog Devices.
  • Part UID: bf19bb83-f0df-407f-b157-e61a29c851aa.
  • Short ID: gzv.
  • Full URL: /jharwinbarrozo/max1983eutplust
  • Latest published version: b18e9a36-d22a-48b6-a43a-80d564f63ff7, published 2026-10-26T03:11:20.325Z; one version total.
  • No confirmed design defect was repaired. No new publication performed. This report does not qualify the lands or model.
Pins and pad mapping
All six expected terminal names, numbers, and electrical types match the active project. Each terminal element UID is also the corresponding pad UID, giving six d...
Verified identity, all six expected pin names/types/mappings, distinct nonoverlapping pads, pin-1 orientation, and the centered nominal parametric model configuration; full checks are in the project files: Part Verification. Lands remain unqualified, and visual lead alignment/seating remains unverified because the renderer excludes assetless models—not because the intended model is missing. No confirmed defect was found, so I made no part edits and did not republish.
Return omitted required manifest fields from your existing inspection: actual owner, exact MPN/manufacturer, UID latest published version full URL shortID, actual numeric pad size pitch row span/body. No additional mutations or document work needed.
  • Owner: jharwinbarrozo; MPN: MAX1983EUT+T; manufacturer: Analog Devices.
  • UID: bf19bb83-f0df-407f-b157-e61a29c851aa; latest published version: b18e9a36-d22a-48b6-a43a-80d564f63ff7; short ID: gzv; full URL: /jharwinbarrozo/max1983eutplust.
  • Actual geometry: pad local size 0.70 × 1.00 mm, rotated ±90° (1.00 mm X × 0.70 mm Y); pitch 0.95 mm; row-center span 2.60 mm; outer copper span 3.60 mm; nominal body 1.600 mm X × 2.900 mm Y × 1.175 mm Z, not a maximum envelope.

Part Verification
Identity and publication
  • Scope: active part only; no children, instances, clones, or courtyard added.
  • Owner: jharwinbarrozo.
  • Exact MPN: MAX1983EUT+T; manufacturer property: Analog Devices.
  • Part UID: bf19bb83-f0df-407f-b157-e61a29c851aa.
  • Short ID: gzv.
  • Full URL: /jharwinbarrozo/max1983eutplust
  • Latest published version: b18e9a36-d22a-48b6-a43a-80d564f63ff7, published 2026-10-26T03:11:20.325Z; one version total.
  • No confirmed design defect was repaired. No new publication performed. This report does not qualify the lands or model.
Pins and pad mapping
All six expected terminal names, numbers, and electrical types match the active project. Each terminal element UID is also the corresponding pad UID, giving six distinct one-to-one mappings. Published symbol readback also lists all six expected names and numbers.

Table


NumberNameTypePad center X, Y (mm)Terminal/pad UID
1BIASPower In-1.30, +0.95520a9dd1-f096-4067-8110-1a13bc194433
2GNDGround-1.30, 02e1c07e7-c8d0-4c96-a6bd-c1c9ddb35b3f
3SHDNInput-1.30, -0.95e581c129-a9d0-40da-ad7f-bdf8b89ea499
4ADJInput+1.30, -0.9520b5ece2-741b-4755-862b-6de3fa0a44ac
5OUTPower Out+1.30, 0987c06e8-48b9-4e7d-b137-ab7b0e00a99c
6INPower In+1.30, +0.95dbb51d7f-58cd-4ef6-8514-c40e8216415f
The generic Terminal's internal single pin appears as undefined in source-project metadata; the terminal designators, Pin Number and Pin Type properties, pad UIDs, and published symbol names are the relevant part-definition fields, not that generic internal pin label.
Actual footprint geometry
Computed local rectangle size is 0.70 × 1.00 mm, rotated ±90°, so board-axis copper dimensions are 1.00 mm X × 0.70 mm Y. Pitch is 0.95 mm, row-center span is 2.60 mm, copper outer span is 3.60 mm, and total copper Y span is 2.60 mm. Adjacent same-row copper gap is 0.25 mm; opposing-row inner gap is 1.60 mm. All six pads are distinct and nonoverlapping. These are actual library values, not a recommended land pattern.
Pin 1 is in the (-X,+Y) quadrant. Top render shows its silkscreen dot above and left of the upper-left pad, consistent with that quadrant; the SVG source uses inverted Y. No pin-number or overlap defect was found.
Land qualification remains open deliberately. Per the supplied task, two prior geometry queries did not qualify the default lands against an authoritative land pattern. No additional land-pattern research or speculative resizing was performed. Nonoverlap does not establish solderability.
Package and nominal model
Stored package: SOT-23-6; package/case property: SOT23-6 U16-1. Computed package size: 1.600 mm X × 2.900 mm Y × 1.175 mm Z. The model node is under the footprint, centered at (0,0,0), with zero rotation, unity scale, Z-up, physical materials enabled, and no asset. This is the intended assetless parametric SOT model, not a missing asset defect. Its dimensions are nominal, not a maximum package envelope.
Top, isometric, and front readback were requested. The renderer explicitly excludes assetless model nodes and returned zero model nodes; it showed the pads and silk only. Therefore visual body/lead alignment, lead count/shape, lead-to-pad overlap, model pin-1 feature, standoff and seating-plane contact could not be verified. Centering and configuration are verified from node metadata only; visual fit is an explicit gap, not a pass.
Evidence limits and disposition
The supplied evidence handle dsq_97842367be03258f47d1 / ds1/4-10 did not resolve in this active project. A fresh query of the stored manufacturer datasheet confirmed the ordering/package association and package-code reference to outline 21-0058 (result dsq_4f73d48447b4be1fccc0, citations ds1, ds3, ds4). It did not recover the outline dimensional table; its pin-map claims carried unsupported citations. Consequently the pin check above is explicitly against the supplied expected map and actual project/published readback, not a newly validated datasheet pinout. Body dimensions, pitch, and spans above are measured project metadata, not newly sourced mechanical limits.
Disposition: identity, six-pin mapping/types, pad uniqueness/nonoverlap, pin-1 silk orientation, and nominal model configuration checked. Lands remain unqualified; mechanical maximum envelope and visual lead/seating fit remain unverified. No confirmed defect requiring repair; no unchanged republish.
  • Identity and publication

  • Pins and pad mapping

  • Actual footprint geometry

  • Package and nominal model

  • Evidence limits and disposition