Only active part; confirm owner jharwinbarrozo; no children/duplicates/sharing/anchor changes. Original exact identity/pins sourced before creation; use attached datasheet to check. Verify symbol numbered pin names/types and actual pad mapping/pin1/count/distinct/nonoverlap, measured lands/pitch/row span vs source if available, existing parametric model/body fit. Nominal model not max envelope and not missing merely no asset. Check Mount Surface Mount; repair confirmed defects only. Publish changed existing sameUID new version; unchanged published no republish. Return final owner UID version fullshortID URL, sourced/measured geometry and explicit unverified checks.
I’ll verify the existing part against its datasheet, check the symbol, footprint, and model, and repair only confirmed defects without changing ownership or identity.
Verified the existing LMH6703MFX/NOPB part only. Owner: jharwinbarrozo. Part UID: 48a0150d-6665-4931-9869-9cf58fc555b6. Project full short ID: 2np. No child projects, duplicates, sharing changes, ownership changes, or anchor changes.
The exact orderable is six-pin SOT-23 DBV.
Symbol and pad mapping
The datasheet top view has 1 OUT, 2 V−, 3 +IN, 4 −IN, 5 active-low shutdown, 6 V+.
Each terminal element UID equals its actual footprint pad UID. All six pin numbers are distinct and match the source. Types: OUT Output; V− and V+ Power In; +IN, −IN, ~SD Input. Shutdown description explicitly says active-low.
Verified LMH6703MFX/NOPB, corrected Mount → Surface Mount, and republished the same UID; six mapped pads match the source dimensions: 1.10 × 0.60 mm, 0.95 mm pitch, 2.60 mm row spacing, without overlaps.
Owner: jharwinbarrozo · UID: 48a0150d-6665-4931-9869-9cf58fc555b6 · Version: 1d088b51-87aa-4d56-bcdb-8c39f7c762f5 · Full short ID: 2np.
The nominal parametric model remains unchanged; sourced geometry and explicit limits—including untested rendered model details, instantiated symbol appearance, and manufacturing apertures—are recorded in the project files: Part Verification.
Verified the existing LMH6703MFX/NOPB part only. Owner: jharwinbarrozo. Part UID: 48a0150d-6665-4931-9869-9cf58fc555b6. Project full short ID: 2np. No child projects, duplicates, sharing changes, ownership changes, or anchor changes.
The exact orderable is six-pin SOT-23 DBV.
Symbol and pad mapping
The datasheet top view has 1 OUT, 2 V−, 3 +IN, 4 −IN, 5 active-low shutdown, 6 V+.
Each terminal element UID equals its actual footprint pad UID. All six pin numbers are distinct and match the source. Types: OUT Output; V− and V+ Power In; +IN, −IN, ~SD Input. Shutdown description explicitly says active-low.
Measured actual computed geometry below is in mm, with X right/Y up:
Table
Pin
Name
X
Y
Effective copper extent X × Y
1
OUT
-1.30
+0.95
1.10 × 0.60
2
V−
-1.30
0
1.10 × 0.60
3
+IN
-1.30
-0.95
1.10 × 0.60
4
−IN
+1.30
-0.95
1.10 × 0.60
5
~SD
+1.30
0
1.10 × 0.60
6
V+
+1.30
+0.95
1.10 × 0.60
Six active rectangular top-side pads. Local pad size 0.60 × 1.10 mm is rotated 90/270 degrees. Centers are distinct. Adjacent-pad copper gap = 0.95 − 0.60 = 0.35 mm; opposite-row inner gap = 2.60 − 1.10 = 1.50 mm. No pair overlaps. Full copper span 3.70 × 2.50 mm. Pin 1 is upper left. The stored SVG pin-1 dot is at negative SVG Y, which maps to positive physical Y; it must not be mistaken for a mirrored marker.
Source board-layout pitch is 0.95 mm and opposing row centers are 2.60 mm, matching measured geometry. Source land dimensions are 1.10 × 0.60 mm per the drawing; the initial parsed description ambiguously called 0.60 spacing. Direct pdftotext extraction of the original attached PDF independently shows 6X (1.1) and 6X (0.6) on the example board layout. Copper corners are square rather than the drawing's example R0.05; this minor example-shape difference was not treated as a confirmed defect.
Existing parametric model
A Model node exists, inherits package SOT-23-6 and packageSize 1.60 × 2.90 × 1.175 mm, is active, centered, unit scale, zero rotation. It is a parametric model, not missing merely because no separate 3D asset is required.
Source body length is 2.75–3.05 mm and overall lead span is 2.60–3.00 mm. Height is 0.90–1.45 mm, drawing 4214840/G 08/2024. Existing 2.90 mm length and 1.175 mm height are range midpoints, not maximum clearance envelopes.
Direct extraction of the original PDF also shows the molded-width labels 1.75/1.45 mm; 1.60 mm is their midpoint. The indexed datasheet service omitted this label, so molded-width verification is independently corroborated by original-PDF text but not by an unambiguous indexed citation. Do not substitute the lead span for molded-body width.
Repair and checks
Only confirmed repaired defect: Mount was Base; set to Surface Mount in place. Readback confirmed Surface Mount. No geometry, pin mapping, or model change was needed.
Missing Properties, Missing Terminals, and Excluded Terminal checks pass. Missing Parametric Symbol Properties is informational only: Pin Group, Pin Orientation, Section unset on all six terminals. Existing names/types/numbers were verified; no speculative symbol restructuring was performed.
Explicit limits
No consuming/test board created, per scope. Instantiated symbol drawing and 3D rendered tessellation/lead detail were not visually tested.
Native part-project layout_2d showed only a default board, so footprint verification uses actual computed tree geometry and UID mapping, not that viewport.
Model dimensions were checked parametrically, not with an exported STEP solid. It is nominal, not a maximum material envelope.
Paste/mask manufacturing apertures and assembly process qualification are not validated by this review.
DRC copper/pad checks did not return board-level results in this part-project context; nonoverlap was checked analytically from all six actual pad extents.