Single project description punctuation edit, NO PUBLISH. Read actual current metadata description/Description property. Preserve all text. If last character is '.', unchanged; otherwise trim trailing whitespace and append exactly one period. Only description mutation; no other metadata/design/sharing/datasheet/MPN edits, no docs, no publish, no child threads. Verify saved readback. Report canonical URL, exact before/after, changed/already correct/failed, readback result and zero publish calls.
Published corrected version: cf160cfd-d577-4ae9-9035-bea6745ac61f.
Native SOT-23 dimensional rules ARE editable in the part project, even though creation ignored dimensional overrides. No manual pads, imported footprint, external CAD, or authored CAD were used.
Direct capability experiment
Used supported packageSize, pinPitch, and pinSize rules on the native footprint node. A reversible probe set packageSize=1.4mm 3.0mm 1.1mm, pinPitch=1.0mm 2.1mm, pinSize=0.7mm 0.8mm. Readback showed native pads resized to 0.7x0.8mm with Gate at (-1.05,+1.00)mm, Source at (-1.05,-1.00)mm, Drain at (+1.05,0)mm. The model's computed packageSize also became 1.4x3.0x1.1mm. This proves real native footprint regeneration and inherited model-size metadata, not merely acceptance of property strings. Actual model mesh dimensions/lead geometry remain unverified because no native preview was available.
The device is P-channel enhancement-mode. Datasheet top view identifies Gate bottom-left, Source bottom-right, Drain top-center. A 90-degree clockwise rotation gives the requested Gate top-left orientation. The retrieved datasheet identifies terminals by letters rather than explicit numeric pin labels: numeric assignments 1=G, 2=S, 3=D are stored in the part, but cannot be described as explicitly numbered in the retrieved datasheet evidence.
Native body metadata is 1.3mm X by 2.9mm Y by 1.025mm Z. The datasheet typical B=1.30mm, H=2.90mm, K1=1.025mm match; K1 permitted range is 0.903–1.10mm. Body size therefore requires no enlargement.
Datasheet suggested pad dimensions: C=2.0mm, X=0.8mm, X1=1.35mm, Y=0.9mm, Y1=2.9mm.
Final native pad geometry (scene XY in mm):
Table
Stored number/name
Center X
Center Y
Local size
Native rotation
1 / G
-1.00
+0.95
0.80x0.90mm
270 degrees
2 / S
-1.00
-0.95
0.80x0.90mm
270 degrees
3 / D
+1.00
0.00
0.80x0.90mm
90 degrees
The rotated pads occupy 0.90mm along scene X and 0.80mm along scene Y. These preserve the datasheet pad orientation after rotating the package. Opposite pad-row centers are 2.00mm apart. Split-side pad pitch is 1.90mm. The half-extent along the split-pad axis is 0.95+0.40=1.35mm, and the full opposing-row outer span is 2.00+0.90=2.90mm. These reproduce X1 and Y1 after rotation.
All three pad UIDs are distinct and equal the corresponding terminal UIDs: G=2efe8e8c-f785-4982-b297-1ff4b8fca5af, S=7e94628f-73fd-47ac-b12a-d7847da254a2, D=17bf93dd-8b37-4003-bcce-127d2e54fafc. No excluded terminal review findings.
Symbol and designator
Initial symbol resolved as a generic rectangle. Set supported Standard Symbol property to P-Channel MOSFET. Symbol SVG readback now reports data-symbol-style=standard, all three terminals, and standard PMOS terminal positions (Gate left, Source above Drain). The tool's visualization shows a rectangular proxy, not detailed transistor strokes, so the actual rendered MOSFET arrow/body-diode artwork was not visually certified.
Native designator text remains active, Top layer, dynamic expression = this.element.designator, computed Q#, size 0.7mm, position (0,+2.45)mm. It is not static text and is outside the pad field.
Verification limitations / open items
Native model node exists, active, parented to footprint, with package=SOT-23, position=0, rotation=0, Z-up, unit scale, physicalMaterials=true, and computed packageSize 1.3x2.9x1.025mm.
3D renderer returned: The project has nothing to render in 3D: no board geometry and no node with a 3D model asset. It does not expose native generated geometry as an asset. Native lead width/span, seating, lead-to-pad alignment, and pin-one model detail are NOT visually verified.
GLB export cannot operate on this part footprint: it is not a top-level board layout.
Symbol proxy rendering similarly prevents a complete visual symbol artwork check.
Component reviews: project metadata, required properties, terminals, and excluded terminals Success; missing Pin Group/Section is Informational for standard-symbol terminals, not an Error or Warning.
Internal feedback submission was attempted for preview limitations but failed; no ticket was filed.
Batch guidance
Do not treat ignored creation overrides as proof of fixed native geometry. Supported part-project rules demonstrably regenerate native SOT-23 pads; package-size changes propagate to model metadata. Exact CAD mesh dimensional-adjustability and lead-fit certification remain blocked by native-model preview/export support, not by a confirmed inability to change supported rules.