The 3D View of this part fails to load. When I open the 3D View tab, the app crashes with a 500 error. The 2D Layout view works. The parametric 3D model of this part is broken. Please fix the parametric 3D model, or redo it, so that the 3D View loads correctly. Do not change the pins, the pin mapping or the symbol.
The replacement parametric model compiles and renders in the 3D inspection. The electrical and 2D data are unchanged; I’m checking the model’s placement before closing out the repair.
I replaced the broken model with a compiled parametric model and verified that it renders; pins, pin mapping, symbol, and 2D footprint are unchanged. Verification details note that seating remains uncertain and the browser crash itself is not yet verified.
Please refresh and reopen 3D View—does it load now?
Completed: inspect automatic model, snapshot protected data, create/compile an explicit parametric replacement, attach it with a model-only rule, and perform actual 3D read-back.
Completed: verify unchanged terminals, mapping, footprint pads, silkscreen and other 2D data through before/after inspection and commit affected-path checks.
Completed: model loading, size, orientation, XY lead fit, and pin-1 alignment checks.
Failed to establish a clean pass: seating in the inspection renderer. Its generated scene shows excessive apparent float and zero board thickness metadata. Native assembly export instead places the feet 0.050 mm above copper. This discrepancy is a platform/render/export limitation, not justification to distort model geometry.
Unattempted: reproducing the original HTTP 500 in the user's browser session; that session and its traceback were unavailable. No publish operation was requested or performed.
Root-cause evidence
Before repair, the automatic model node ba8b3708-731d-4442-a7a4-10cae8169bae.defaultFootprint_model existed with package SOT-23, origin zero, unit scale and zero rotation, but no storageName, URL or explicit source asset. Both ordinary and model-filtered project asset lists were empty. Initial 3D read-back returned 0 of 0 model nodes, rendering only the footprint. There was no editable legacy source or compiler traceback to repair in place.
This localizes the observed defect to automatic package-model resolution. The exact server-side exception behind the reported 500 remains unconfirmed. The explicit source bypasses that unresolved automatic model path; no particular syntax-error diagnosis is claimed.
Exact persistent changes
Created smt3-package.build123d, asset UID ac8860d4-59fc-4117-8314-477722fbf5be.
Created ruleset Explicit SMT3 package model, UID 80c168d5-7503-4613-8da7-deae87ef1ab8.
Only rule: asset: smt3-package.build123d. Selector read-back matched exactly one model.
Existing model parent retained: ba8b3708-731d-4442-a7a4-10cae8169bae.defaultFootprint.
No new footprint or pad nodes. Position zero, rotation zero, unit scale, Z-up true, physical materials true and showEdges false retained.
A direct node-rule attempt was rejected with Unknown pcb node uid and made no change; the generated model requires the selector-based override used above.
3D Model
Geometry and compile evidence
The current part datasheet identifies 2SB1590K as SMT3/SOT-346.
SMT3 outline limits are D 2.80–3.00 mm, E 1.50–1.80 mm, A 1.00–1.40 mm, A1 0–0.10 mm, lead thickness 0.09–0.25 mm and foot length 0.30–0.60 mm; these are limits rather than nominal dimensions.
The authored visualization selects body XY 1.6 × 2.9 mm, total height 1.2 mm, standoff 0.1 mm, lead span 2.8 mm, width 0.4 mm, thickness 0.15 mm, and a 0.35 mm top foot segment. Internal bends are simplified visualization geometry, not tooling geometry. Body dimensions were not derived from pads. The pin-1 dimple and emitter lead occupy the existing (-X,+Y) corner.
Actual upload-pipeline compilation succeeded, without a traceback:
Overall: 2.8 × 2.9 × 1.2 mm.
Body: 1.6 × 2.9 × 1.1 mm.
Each lead bounding box: 0.65 × 0.4 × 0.5 mm.
4 solids, 38 faces, 5.2614 mm³ total volume.
Body color #1c1c1c; three separate lead solids color #a4a291.
Info: generic small-solid/thin-feature findings (0.053 mm³ and 0.4 mm bounding-box dimension) are expected for this SMT package and did not prevent compilation.
Actual 3D read-back
After repair, the render tool returned 1 of 1 model nodes, named Model, with actual isometric, top and front images. The tree resolves to the new source and its GLB URL. Top view shows all three feet fitting the existing pads, two leads on -X, collector on +X, and the dimple near emitter pad 1 and its silk dot.
Read-back scene identifier: document_assets/2sb1590kt146q-scene-a042aa42c3450ea09853b3309d72ba38.fluxscene. The tool returned the three 768-pixel inspection images in the thread; project-file policy does not allow embedding these inspection images here.
Seating limitation
Warning: front/isometric inspection depicts a visibly floating model. Reading the exact scene JSON shows board substrateThickness: 0, board z=0, model z=0.000035 m, whereas the footprint tree reports substrate thickness 0.0014986 m. Source lead feet are at z=0, and the actual derived package GLB spans height 0–1.2 mm in its Y-up frame.
A separate native complete-assembly GLB export succeeds. Reading that actual export—not a reconstructed model—finds foot height 1.595 mm and copper top 1.545 mm, a 0.050 mm gap, not the large gap in the inspection scene. No compensating Z hack was applied because it would conceal inconsistent platform frames and risk use on downstream boards.
3D Model
A direct webp conversion of that native assembly export returned HTTP 400; this does not negate the successful export or inspection images. Strict flush seating remains open. Browser-editor behavior must also be confirmed in the user's session before claiming that the original browser issue is fully resolved.
Protected before/after comparison
All values below are unchanged. Pad positions are mm; local pad size is 0.8 × 0.9 mm before rotation.
Table
Terminal
Pin
Pad UID
Pad XY
Rotation
B / Base
2
1be488f4-1a50-4be6-b8bb-42bdbe055cf6
(-1.2,-0.95)
4.71239 rad
C / Collector
3
2888ad41-5759-4b1d-879d-a9eb5b480398
(1.2,0)
1.5708 rad
E / Emitter
1
f5863b70-e537-47b4-9f13-1aab737b6721
(-1.2,0.95)
4.71239 rad
Schematic B remains (-107.75,0), flipX true; C (92.25,0); E (-107.75,40), flipX true. Pin descriptions/types and Symbol Pin Position property unchanged.
Three terminals, zero nets, zero wire vertices, zero no-connects before/after.
All pad IDs, positions, rotations, rectangle shapes and computed dimensions unchanged.
Designator text node, Q# content, (0,2.45) mm location and 0.7 mm font unchanged.
Silk SVG payload/UID, including pin-1 circle, unchanged.
Only the model's resolved storageName/URL changed in complete before/after node-tree inspection.
The schematic flat tool does not expose standalone part-symbol geometry; preservation of underlying symbol data is corroborated by the mutation log rather than a new symbol raster.
Mutation log
The design changes have exactly these affected paths:
Commit #5efe5c2c: assets.ac8860d4-59fc-4117-8314-477722fbf5be, one forward/reverse patch.
Commit #d0f9b261: pcbLayoutRuleSets.80c168d5-7503-4613-8da7-deae87ef1ab8, one forward/reverse patch.
No terminal, pin mapping, symbol, footprint, pad, 2D geometry or electrical metadata path was edited. This project file is an additional record, not an electrical change. Automatic post-mutation DRC validators returned no result and were explicitly NOT CHECKED; no clean DRC claim is made.