I’ll research the manufacturer’s specifications and sourcing options, then create a cited application guide with practical wiring, resistor calculations, and replacement compatibility notes.
I verified the LED’s ratings and the manufacturer’s warning against reverse bias in the off state. The guide will distinguish nominal resistor calculations from worst-case current limits and label alternatives conservatively rather than claim unverified drop-in compatibility.
The ROHM SML-D13FWT86C is a two-terminal, green surface-mount indicator LED in a 1.6 × 0.8 × 0.55 mm package, with a typical dominant wavelength of 564.5 nm at 20 mA. Its common circuit role is a power or GPIO-controlled status indicator; the C-suffix version is specified for automotive usage and AEC-Q102 qualification.
1. Quick Specifications
Absolute maximum ratings are stress limits, not recommended operating points. Electrical and optical values below apply at Ta = 25 °C unless stated otherwise.
Created the SML-D13FWT86C Application and Usage Guide with all seven requested sections, cited ratings, 3.3 V/5 V resistor calculations, layout guidance, and sourcing details.
Alternatives are labeled functionally similar—not verified drop-in replacements; unresolved footprint dimensions and alternate-part electrical limits are explicitly flagged. No schematic or footprint geometry was changed.