I’ll research the MDBT50Q-1MV2 manufacturer documentation and write a cited application guide covering wiring, layout, alternatives, and sourcing, with any unverified details clearly marked.
I verified all 61 pin assignments and the key supply limits. The guide will distinguish VDD from the high-voltage input and flag the capacitor-value and pad-pitch details I could not reliably verify.
The Raytac MDBT50Q-1MV2 is a Bluetooth Low Energy module built around Nordic's nRF52840, with an integrated chip antenna. Its most common integration is a programmable wireless sensor or connected controller using BLE; Raytac also identifies Thread and Zigbee (IEEE 802.15.4) applications, subject to the selected firmware stack. Raytac product page
This guide addresses the module's 61-pad pinout, not the nRF52840 silicon package. It is an integration reference, not a validation of this Flux part's symbol or footprint. Datasheet basis: Raytac Version L, issued 2023-05-24. Engineering recommendations below are expli...
Exact reference-circuit capacitor values, pad pitch, and detailed alternative equivalence remain explicitly unverified; the guide identifies what needs confirmation before production use.